Motorola CP200 ユーザーズマニュアル

If a battery is new, or its charge level is very 
low, you will need to charge it before you can 
use it. When the battery level is low and the 
radio is in transmit mode you will see the LED 
indicator flash red. Upon release of the PTT 
button, you will hear an alert tone.

Note: Batteries are shipped uncharged from 

the factory. Always charge a new 
battery 14 to 16 hours before initial 
use, regardless of the status indicated 
by the charger.

Note: Do not use the wall charger and 

desktop charger at the same time 
when charging.

Note: Do not use the wall charger if using  

lithium-ion (Li-Ion) or nickel-metal hyride 
(NiMH) batteries. The wall charger is for 
nickel-cadmium (NiCd) batteries only.

To Charge the Battery

Turn the radio off.

Lift the dust cover to expose the audio 
accessory connector.

Insert the charging adapter into the 
accessory connector.

Plug the charging adapter into an electrical 
outlet.

•

The LED on the charging adapter lights 
Red while the charger is plugged into an 
electrical outlet.

Do not leave the charger connected 
to the radio when it is not connected 
to the electrical outlet.

Unplug the charger from the electrical outlet 
and radio after 10 hours.

After the initial charge of 14 to 16 
hours, do not charge the battery 
more than 10 hours. 

03_GetStarted.fm  Page 17  Monday, November 17, 2003  1:56 PM