Motorola 6880906Z72-O ユーザーズマニュアル
No Power
Message Not Trans-
mitted
mitted
Message Not
Received
Received
Hearing Other Noise
or Conversation on a
Channel
or Conversation on a
Channel
Limited Talk Range
Recharge or replace NiMH battery.
Make sure the Push-To-Talk button is com-
pletely pressed as you transmit, LED should
glow continuously.
pletely pressed as you transmit, LED should
glow continuously.
Reposition, replace or charge battery.
Confirm radios have the same frequency and
Interference Eliminator Code settings.
Interference Eliminator Code settings.
Make sure Push-To-Talk is not inadvertently
being pressed.
being pressed.
Reposition, replace or charge battery.
Buildings, obstructions, operating indoors or
in vehicles may interfere with communica-
tion. Change your location.
in vehicles may interfere with communica-
tion. Change your location.
Make sure volume is turned up.
Confirm Interference Eliminator Code is set,
(active settings are 1-38).
(active settings are 1-38).
Shared frequency or Interference Eliminator
Code may be in use, change frequency or
code.
Code may be in use, change frequency or
code.
Steel/concrete structures, heavy foliage and
use in residential/industrial areas, buildings
and in vehicles will decrease range, check for
clear line of sight to improve transmission.
use in residential/industrial areas, buildings
and in vehicles will decrease range, check for
clear line of sight to improve transmission.
Wearing radio close to body such as in a
pocket or on a belt will decrease range,
change location of radio.
pocket or on a belt will decrease range,
change location of radio.
)