Golden Technologies GP601 CC ユーザーズマニュアル

 

 

 

 

27

OPERATION  

        

 

                                   Figure 18                                 Figure 19 

 
FREEWHEEL MODE  
♦

 

To disengage the gears and put your power chair in freewheel mode, turn the 
freewheel levers as shown.  See figure 18.  

♦

 

To re-engage the gears and take your chair out of freewheel mode, turn the levers as 
shown.  See figure 19.  

 

1. Never put your power chair in freewheel mode when it is on a slope or incline of  
    any type.  
 
2. Never put your power chair in freewheel mode while you are operating your  
    power chair.  

 
THERMAL ROLLBACK  
Your Compass

™

 is equipped with a safety system.  A microprocessor monitors the operat-

ing temperatures of the controller. In the event of excessive heat occurring in the 
controller, the controller will decrease the speed of your chair.  This is done to reduce the 
load on the electrical system and allow the components to dissipate heat. The controller 
will automatically set the chair’s speed back to full normal when the operating 
temperature returns to normal levels.  

THE MAIN CIRCUIT BREAKER  
The main circuit breaker is another safety feature incorporated into your Compass

™

.  

This device monitors the amount of current being drawn from the batteries when the 
chair is in use. When the motors are heavily strained and too high a current draw is 
being placed on the batteries, the main circuit breaker will trip and bring your chair to 
a stop.