Golden Technologies Companion II ユーザーズマニュアル

Companion

SEAT
ROTATION
LEVER

OPERATION

Armrest Width Adjustment
To adjust the armrest width:
1. Loosen the adjustment knobs at the rear of

the seat. See figure 6.

2. Slide the armrests in or out to the desired
width.
3. Tighten the adjustment knobs.

Seat Height Adjustment
To adjust the seat height:
1. Remove the seat by lifting it straight up.
2. Set the seat aside.
3. Remove the bolt, nut, and washer that hold

the seat post in the seat pedestal. See figure
7.

4. Position the seat post at the desired height

while aligning the holes in the seat post and
the seat pedestal.

5. Reinstall and tighten the nut, bolt, and

washer. The bolt must be installed from
the back of the pedestal, with the nut and
washer to the front of the scooter.

Seat Rotation Lever
The seat can be rotated through 360° and
locked at any 45° position.
1. Pull up on the seat rotatation lever and

rotate the seat to the desired position. See
figure 8.

2. Release the handle to lock the seat at any

45° position.

Flip-up Armrests
Pull up on the end of either armrest to flip it
up for easy transfer on and off your Golden
Companion. See figure 8.

SEATING OPTIONS
The Golden Companion seat is available in a
variety of colors and fabrics, including vinyl.

FIGURE 5. ARMREST HEIGHT

HEIGHT
ADjUSTING
SCREWS

ADjUSTMENT
KNOBS

NUT AND
WASHERS

HEIGHT AD-
jUSTMENT
BOLT

FIGURE 8. FLIP-UP ARMRESTS

FIGURE 7. SEAT HEIGHT

FIGURE 6. ARMREST WIDTH

Companion Owner's Manual: GC222, GC223, GC322, GC323, GC325, GC421