Golden Technologies GP601 ユーザーズマニュアル
Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC
Revised 11/30/06
21
OPERATION
Your Compass
™
is simple to operate. However, for your safety and the safety of others,
Golden Technologies, Inc. recommends that you carefully read and understand the
following operating instructions. We also recommend that you practice operating your
following operating instructions. We also recommend that you practice operating your
Compass
™
in an area free of any obstacles. Once you have gained confidence in your
ability to control your power chair, you will more easily be able to operate it in normal
daily conditions.
daily conditions.
A WORD OF CAUTION
Before turning on the power of your Compass
Before turning on the power of your Compass
™
, take note of your environment and set
your speed control accordingly. (see “The Speed Control Buttons” Figure 17) For indoor
driving, we recommend that you select the lowest speed setting. For outdoor driving, we
recommend that you select a speed setting at which you feel comfortable, safe, and in
control of your power chair. Familiarize yourself with the features of your Compass
driving, we recommend that you select the lowest speed setting. For outdoor driving, we
recommend that you select a speed setting at which you feel comfortable, safe, and in
control of your power chair. Familiarize yourself with the features of your Compass
™
described below and follow the instructions to safely operate your power chair.
DRIVING: The Joystick On/Off Switch
Push the on/off button to turn on the power to your Compass
DRIVING: The Joystick On/Off Switch
Push the on/off button to turn on the power to your Compass
™
. See figure 17.
The 8 LEDs (Light Emitting Diodes) will flash once and a number of LEDs will remain
depending on the state of the battery charge.
♦ The LED array, that functions as the battery charge gauge, will light up. See “Battery
Charging” on page 28.
Pressing the on/off button again will turn off the power to your Compass
depending on the state of the battery charge.
♦ The LED array, that functions as the battery charge gauge, will light up. See “Battery
Charging” on page 28.
Pressing the on/off button again will turn off the power to your Compass
™
.
Figure 17
On/Off Button
Speed Control - Slower
Speed Control - Faster
Battery Charge LED
Array
Horn Button
Speed Setting LED
Array
Joystick