Golden Technologies GP52 ユーザーズマニュアル

Golden Alero GP52SS Owner’s Manual 

                                                                                               Revised 0807 

24 

 

MAINTENANCE 

 

Your Alero needs some basic attention to ensure it provides reliable service.  We recommend 
your power wheelchair is checked regularly for maintenance requirements and also receives a 
thorough annual check up by your Golden Authorized Dealer. 
 
Regular Maintenance 

 

1.  Make sure power is off before performing any maintenance. 

 

2.  Check the joystick to make sure it is not bent or damaged and that it returns to center 

when you release it.  See a Golden Authorized Dealer if there is any problem. 

 

3.  Check the rubber boot around the base of the joystick for damage.  Visually inspect the 

boot.  Do not handle or try to repair it.  See a Golden Authorized Dealer if there is any 
problem. 

 

4.  Keep the upholstery and frame clean by wiping with a soft cloth, particularly after 

driving through wet, sandy or muddy conditions.   

 

 

Do not use harsh abrasive materials when cleaning,  Do not 
apply liquid cleaners or solvents directly to the control box, 
battery charger or any electrical connections. 

 
5.  Keep wheels free from lint, hair, sand or carpet fibers. 

 

6.  Check motor connectors, joystick connectors and battery connectors for a tight fit and 

that they are secured properly.  Make sure there are no frayed or cut wires.  See a 
Golden Authorized Dealer if there is any problem. 

 

7.  Tighten the controller adjustment arm. 

 

8.  Charge your batteries regularly.  Make sure the terminals are free of corrosion.  

Remember to always wear gloves when handling any battery. 

 

9.  Lightly oil axle pin, wheel axles and bearings once every three months. 

 

10. Check tires for abnormal wear and tear. 

 

1.  Check the controller programmer for the user’s needs. 

 

2.  Check the wheelchair frame. 

 

3.  Check the upholstery for wear. 

 

4.  Check the tires for abnormal wear and tear. 

 

5.  Check the batteries and terminals. 

 

6.  Check all connectors for secure fits. 

 

7.  Check all cables for frayed, cut or exposed wires. 

 

8.  Check the joystick to make sure it is not bent or damaged and that it returns to center 

when you release it.   

 

9.  Check the rubber boot around the base of the joystick for damage.  Visually inspect the 

boot.