Shoprider PHFW-1118 ユーザーズマニュアル

ページ / 24
6/25/2004 
16
Batteries & Battery Charging
 
 
The Shoprider folding power chair is designed to operate on two U1 
(2 x 33/34/36 Ah) gel, or sealed lead acid, maintenance free 
batteries.  For easy handling, Velcro or plastic carrying straps are 
provided to assist in fitting or removal.  The duration of the batteries 
can be affected by temperature, terrain and weight of the user.  The 
battery gauge is a guide on the remaining charge in the batteries. 
 
The active user will need to charge the batteries after using 
approximately more than 30% of battery capacity.  As an inactive 
user, only using from once a week to every other day, the recharge 
point would be at 50% of discharge. 
 
In only using for short distance each day, it is advisable to charge at 
the end of each week. 
 
Batteries should be kept fully charged at all times.  They must not be 
left in a discharged state if not using the unit for some time.  The 
batteries should be checked once a month and recharged as needed. 
 
Battery Charging Procedure 
 
To recharge the folding power chair, connect the charger to the 
Charging Port at the front of the VSI referred to as (8) in Figure 2.  
Switch on the charger. 
 
Do not leave the charger plugged into the Charging Port if the 
charger is not charging.  This charger is for indoor use only.  Do not 
expose it to rain or water spray.  Do not cover the battery charging 
vent. 
 
One example of indicator light on the charger gives advice as follows: 
Red    - 
Power on 
Amber - 
Battery charging 
Green - 
Charging complete 
Please refer to the LED indicator description based on charging 
status of the charger.