Gateway DVD Player ユーザーズマニュアル
22
Chapter 2: Setting Up Your Player
www.gateway.com
3
Use your remote control’s arrow buttons to highlight
Network
, then press
ENTER
. The message “Loading network settings” appears, and the player
automatically connects to the wired Ethernet network. If multiple
networks are available, highlight the
networks are available, highlight the
Network
setting, then press
ENTER
again to select the correct network from the network list.
The IP address appears in the lower-right corner of the screen. To change
the way the IP address is selected, see
the way the IP address is selected, see
To change the player name (as it appears to other players), see
.
4
Highlight
OK
, then press
ENTER
. Network setup is complete.
5
Press
SETUP
or
RETURN
to close the Welcome to Setup screen.
6
Go to
for instructions on customizing your
player’s other settings.
Wireless access point setup
To configure the player for a wireless access point network:
1
Make sure that your computer is on and Media Server is running.
The Media Server icon
The Media Server icon
in the Windows taskbar shows that the program
is running.
If the Media Server icon has a red “x” on it, Media Server is running but
cannot connect to the network. See
cannot connect to the network. See