RCA L32WD26D ユーザーズマニュアル

  The default is to show all on-screen displays. To turn the 

option off, press the down arrow to highlight Display, then press 
ENTER. Press the up or down arrow to highlight Off and press ENTER.

  There are two types of picture content recorded 

on DVD discs- Film (pictures recorded from fi lms at 24 frames per 
second) and Video (video signals recorded at 30 frames per second). 
Choose the option according to the type of content being viewed, or 
choose Auto and the DVD player selects for you.

  Select the time shown between each JPEG.

The Sound menu lets you select different sound settings to match the 
equipment you have connected to your unit.

  The Night Mode feature compresses the dynamic range 

(quietest sound to loudest sound) of a disc’s soundtrack. For example, 
action scenes might be very loud, while whispered dialog is quiet. The 
Night Mode feature evens out the range of the volume by making loud 
sounds quieter and soft sounds louder. 

  Lets you choose which type of digital audio is output 

from the DIGITAL AUDIO OUTPUT jack. Choose PCM if you 
connected a PCM receiver. Choose Bitstream if you connected a Dolby 
5.1 or Dolby 3.1 receiver.

When you enter Parental Control on the DVD’s main menu you will 
need to enter 0000 and press ENTER.

  You decide which ratings require a password and which 

ones don’t. This system ranks the ratings 1 through 8 in order to 
accommodate different countries’ ratings systems. The limitation is 
more severe as the level number decreases.

In order for the Rating Level feature to work, the disc must be encoded 
with rating information. If the author of the disc did not encode rating 

information, then this feature will not work for that disc.

Highlight Parental and press ENTER (enter your password and then 
press ENTER). Press the up or down arrow to highlight the desired 
rating and press ENTER. If you set 3, for example, as the highest rating  
then the Parental selection appears as 3 (that’s the DVD’s number for 
PG in the 8-level system) for the movie studio’s rating. This means 
when the DVD is locked, it will require you to enter the password to 
play any discs that are rated higher than 3 (i.e., PG-13 or NC-17).

  You can change the password by entering your current 

password and then entering a new password. Press the number 
buttons on the remote to enter the new password you want to use and 
press ENTER.

If you forget your password it can be reset. With no disc in the player 
and in DVD mode, press the STOP button on the TV. Continue holding 
the button and press the 7 number button on the remote at the same 
time. Enter a new password.