Haier HL15RW ユーザーズマニュアル

Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has 
   Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;

.Turn on the LCD-TV first ; and then turn on the 

   power of the AV device;
4.Press the TV/AV button to set 
   the video input mode of the 
   LCD-TV to S-Video mode or 
   Video mode.

Connection Option 1
Set VCR output switch to 3 or 4 and then 
tune TV to the same channel number.

Connection Option 2
1. Connect the audio and video cables from
    the VCR's output jacks to the TV input jacks, 
    as shown in the figure.
    When connecting the TV to VCR, match
    the jack colors (Video = yellow, Audio
    Left = white,and Audio Right = red).
    If you connect an S-VIDEO output from 
    VCR to the S-VIDEO input, the picture 
    quality is improved; compared to conne-
    cting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press
    PLAY on the VCR. (Refer to the VCR owner s
    manual.)
3

- To avoid picture noise (interference), leave an adequate distance between the
   VCR and TV

.

1

2

HDMI

Connect the  cables from the external equipment's 
output jacks to the TV input jacks, as shown in the figure.

1.

Select the input source by using TV/AV button

   on the remote control or on the TV.
2.

Operate the corresponding external equipment. 

    Refer to external equipment operating guide.