DELL 883933-11 Rev. E ユーザーズマニュアル

Chapter 3

EthernetSpeed={Auto, 100M-F,
100M-H, 10M-F, 10M-H}

Specifies the NIC speed.
Auto - auto-negotiates speed with peer (default).
100M-F is 100 Mbps Full Duplex.
100M-H is 100 Mbps Half Duplex.
10M-F is 10 Mbps Full Duplex.
10M-H is 10 Mbps Half Duplex.
NOTE: Gigabit ethernet (1000Mbps) is available on 
hardware that supports it via the Auto value.

FileServer=[<protocol://>]host

host is used to access files using the specified 
protocol. If no protocol is specified, FTP is assumed 
(for example, 192.168.0.1 is understood as ftp://
192.168.0.1.)

IcaForceHttps={no, yes}

For ICA only.
Yes/no option to force the connection (PnAgent 
login) to use HTTPS servers. Default is no.

IcaShowAllApps={no, yes}

For ICA only.
Yes/no option to display all the published apps on the 
desktop. Default is no.
NOTE: By default the applications seen on the 
desktop in a PNAgent login are the applications that 
have a Desktop shortcut set at the server side. To see 
all the published apps on the desktop, 
IcaShowAllApps must be enabled. 

PermitSSHRootLogin={no, yes}

Yes/no option to enable logging in through SSH as the 
Linux superuser (root). 

PNLiteServer=host[:port]

A list of hosts with optional port numbers. 
If not specified, port depends on the browsing 
protocol.
Default=Empty.

RapportSecurePort=port 

Designates the HTTP(S) secure port used for the WDM 
agent. Default port number is 443.
For example:
RapportServer=192.168.0.2:80
RapportSecurePort=443

RapportServer=host[:port]

The WDM Server and optional port to which to 
connect. This can be either a DNS name or an IP 
Address, optionally followed by a “:” and a port 
number. The default port number is 80.

Seamless={no, yes} 

Yes/no option to set the default resolution for 
ICA-published applications to seamless. 

TCXUSBVirtualize={no, yes} 

Yes/no option to enable TCX USB virtualization ports.

UsePasswd

Yes/no option to require a password to be entered for 
the remote VNC connection.