Polycom 3725-76302-001O ユーザーズマニュアル
Device Management
Polycom, Inc.
120
See also:
External H.323 SBC
On the External H.323 SBC page, you can add or remove H.323 SBCs (session border controllers) that the
system can use to reach endpoints outside the enterprise network via prefix-based dialing (Polycom VBP
appliances are supported). In an H.323 environment, H.323 SBCs regulate access across the firewall.
system can use to reach endpoints outside the enterprise network via prefix-based dialing (Polycom VBP
appliances are supported). In an H.323 environment, H.323 SBCs regulate access across the firewall.
This is a supercluster-wide configuration.
Field
Description
Enabled
Clearing this check box lets you stop using this registration without deleting
the registration information.
the registration information.
Address of record
The AOR with which the system registers (see registration rules in
RFC 3261), such as:
RFC 3261), such as:
sip:1000@dma.polycom.com
Territory to perform registration
Responsibility for registering must be assigned to a territory, thus making the
primary or backup RealPresence DMA cluster for the territory responsible,
depending on which is active.
primary or backup RealPresence DMA cluster for the territory responsible,
depending on which is active.
Contact address format
Select IP or DNS to specify that the contact header should use the virtual IP
address or virtual DNS name of the cluster currently managing the territory. If
the territory responsibility switches to the other cluster, it re-sends the
registration using its IP address or DNS name.
Select Free Form to specify that the contact header should use the FQDN
you enter. The external peer must be able to resolve this FQDN.
address or virtual DNS name of the cluster currently managing the territory. If
the territory responsibility switches to the other cluster, it re-sends the
registration using its IP address or DNS name.
Select Free Form to specify that the contact header should use the FQDN
you enter. The external peer must be able to resolve this FQDN.
User name
The user name to use for the authentication credentials if the external peer
challenges the registration request.
Note: The authentication credentials specified here are specific to this SIP
peer and are not tied to any other authentication configuration values.
challenges the registration request.
Note: The authentication credentials specified here are specific to this SIP
peer and are not tied to any other authentication configuration values.
Password
Confirm password
Confirm password
The password to use for the authentication credentials if the external peer
challenges the registration request.
challenges the registration request.
Request-URI
The Request-URI to include when registering with this SIP peer, specified
using the variables (#delimited) defined in
using the variables (#delimited) defined in
Other headers
Additional headers to include when registering with this SIP peer.
Click Add to add a header. In the Add Header dialog box, specify the header
name and value(s), using the variables (#delimited) defined in
Click Add to add a header. In the Add Header dialog box, specify the header
name and value(s), using the variables (#delimited) defined in
Click Edit or Delete to edit or delete the selected header.