RoboteQ AX2550/2850 ユーザーズマニュアル
AX2500/2850 Quick Start
18
AX2500/2850 Motor Controller User’s Manual
Version 1.7. February 1, 2005
Connecting the controller to your PC using Roborun
Connecting the controller to your PC is not necessary for basic R/C operation. However, it
is a very simple procedure that is useful for the following purposes:
is a very simple procedure that is useful for the following purposes:
•
to Read and Set the programmable parameters with a user-friendly graphical inter-
face
face
•
to obtain the controller’s software revision and date
•
to send precise commands to the motors
•
to read and plot real-time current consumption value
•
Save captured parameters onto disk for later analysis
•
to update the controller’s software
Press the Prog button to move to the next parameter
(C= Motor Control Mode) and its value (0= Separate)
(C= Motor Control Mode) and its value (0= Separate)
Press Prog to select
next parameter
Press the Set button to change the parameter’s value
(1= Combined)
(1= Combined)
Press Set to select
next value for parameter
Press the Prog button record the change and move to
the next parameter (A= Amps limit) and it’s value (2=
75A)
the next parameter (A= Amps limit) and it’s value (2=
75A)
Press the Reset button or power off/on the control to
restart the controller using the new parameters.
restart the controller using the new parameters.
Press Prog to store change
and select next parameter
Reset controller
to exit