HP (Hewlett-Packard) 1660 ユーザーズマニュアル
Set Up the Pattern Generator Format Menu
For the pattern generator to output the "walking ones" to the logic analyzer,
the lower four bits of Pod 4, which is connected to the training board through
the TTL Data Pod, must be assigned to PATGEN.
the lower four bits of Pod 4, which is connected to the training board through
the TTL Data Pod, must be assigned to PATGEN.
1
1
Highlight the
Analyzer
field in the top-left corner of the screen, and
press the
Select
key. Highlight
Patt Gen
, and press the
Select
key.
2
If the Format Menu of the Pattern Generator is now displayed, go to
step 4.
step 4.
3
Press the
Format
MENU key.
4
Highlight
Lab1
below Label, and press the
Select
key. Highlight
Modify
Label
in the pop-up menu, and press the
Select
key.
5
Type PATGEN, and Press the
Done
key.
6
Highlight the field showing the Pod B4 to the right of PATGEN, and
press the
press the
Select
key.
Setting Up the Pattern Generator Format Menu
The lower 4 bits of
Pod B4 are assigned to
output the "walking
ones" .
Pod B4 are assigned to
output the "walking
ones" .
Using the Pattern Generator
Set Up the Pattern Generator Format Menu
Set Up the Pattern Generator Format Menu
9-10