Panasonic 8020P ユーザーズマニュアル
14
Getting To Know Your Machine
INV
INV
LTR
LGL
LDR
LTR
LDR
LDR
INV
LTR
LGL
LTR
LGL
INV
LTR
INV
INV-R
LTR-R
LGL
LDR
Width Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Indicator
Paper Tray
∗
∗∗
∗∗
Hold the guides by the center when
adjusting the width
adjusting the width
Operation Chart
If set to other
function mode
(DP-8020E/8020P
only)
function mode
(DP-8020E/8020P
only)
Face Up
A B C
From
ADF/i-ADF
(Option)
ADF/i-ADF
(Option)
From
Platen
Platen
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
the Invoice area and select
Invoice.
or
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Load Paper: Face Up
Paper Weight: 16 - 24 lb (60 - 90 g/m
Paper Weight: 16 - 24 lb (60 - 90 g/m
2
)
Paper Capacity: 550 Sheets (20 lb (80 g/m
2
))
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed, or skew.
Incorrect adjustment may cause the
paper to wrinkle, misfed, or skew.
Original Guides
■ Quick Operation Chart
NOTE:
To change the paper size, refer to
page 62.
To change the paper size, refer to
page 62.
1
1
2
3
Adding Paper
Turn the Power
Switch to the
ON position
Switch to the
ON position
Original Guides∗
∗∗
∗∗
Adjust to the
original's width
original's width
Tray
(Max. 50 Letter
size originals)
size originals)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
LGL: Legal, LDR: Ledger
4
4
Load Paper
(Do not exceed limit guides)
Paper Weight: 15-34 lb (55 - 133 g/m
(Do not exceed limit guides)
Paper Weight: 15-34 lb (55 - 133 g/m
2
)
Paper Capacity: 50 sheets/20 lb (80 g/m
2
)
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper, then load them together onto
the tray.
remove the leftover paper from the
tray, and align it with the additional
paper, then load them together onto
the tray.
NOTE:
Load the paper properly, and ensure
that it does not exceed the Max. Level
indicator.
that it does not exceed the Max. Level
indicator.
2
1
2
3
(ON)
(OFF)