Panasonic SQT0184 ユーザーズマニュアル
- 13 -
≥ The following steps are based on a smartphone.
≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi
≥ Do not connect a LAN cable. Doing so will disable the Wi-Fi
®
function.
1
Turn this unit on.
2
Go to Wi-Fi
®
settings on the device.
≥ Proceed to the next step after the network indicator changes from blinking in
blue and red to blinking in blue.
– The blinking in blue starts after maximum of approximately 60 seconds. If
– The blinking in blue starts after maximum of approximately 60 seconds. If
the blinking in blue does not start, restore the factory defaults. (l 27)
≥ Make sure that DHCP is enabled for the network settings on the device.
3
Select “AllPlay XXXXXX_AJ” to connect to this unit.
≥ “X” stands for a digit that is unique to each set.
Using an Internet browser
Settings
Wi-Fi settings
Wi-Fi