Addtron Technology Mercury Hub PR0017 マニュアル

目次

• Mercury Hub

  1
• User Guide

  1
• PR0018 (Mains Powered)

  1
• PR0017 (Mercury Controller Powered)

  1
• T

  2
• THE MERCURY HUB 3

  2
• Description 3

  2
• Front View 3

  2
• Rear View 3

  2
• Top View 4

  2
• Connection to Mercury Controllers: 4

  2
• RS232 Lead Lengths 4

  2
• Connection to other IP equipment 4

  2
• Connection to another Mercury Hub or Other Ethernet Hub/swit

  2
• Connection to a Data Manager/Director 4

  2
• 10 Base T connectors 5

  2
• Network ID 5

  2
• ID for equipment with rotary switch’s. 5

  2
• SPECIFICATION 6

  2
• Power requirements: 6

  2
• Mounting 6

  2
• RS232 Cable Lengths 6

  2
• Ethernet Cable lengths 6

  2
• The Mercury Hub

  3
• From Resource Data Management

  3
  • Description

    3
• The Mercury Hub is a device that allows up to 10 RDM control

  3
  • Front View

    3
  • Rear View

    3
  • Top View

    4
  • Connection to Mercury Controllers:

    4
• Using a standard CAT5 patch lead, connect the serial output

  4
  • RS232 Lead Lengths

    4
• For mains powered hubs, patch lead maximum length must not e

  4
• For Mercury powered hubs, inputs 1 and 2 patch leads must no

  4
• The 3-character address that will be seen on the system fron

  4
  • Connection to other IP equipment

    4
• Use a standard CAT5 patch lead to connect other IP equipment

  4
  • Connection to another Mercury Hub or Other Ethernet Hub/swit

    4
• Use a standard CAT5 patch lead from the Uplink port into a s

  4
  • Connection to a Data Manager/Director

    4
• Use a standard CAT5 patch lead and connect the Data Manager

  4
  • 10 Base T connectors

    5
• The three 10Base T connectors have 2 leds on them: The green

  5
• The amber LED indicates there is an error or fault on that c

  5
  • Network ID

    5
• The 3-character network ID is made up from the positions of

  5
• E.g. Bay 10 case 2:

  5
• The 2 rotary switches set to "1" and "0", controller plugged

  5
• Note that case number 10 would plug into RS232 port 0 (right

  5
  • ID for equipment with rotary switch’s.

    5
• For RDM products that use the 3 rotary switch’s for the netw

  5
• Specification

  6
  • Power requirements:

    6
• Supply Voltage Range: 100 - 240 Vac ±10% (Mains version)

  6
• Supply Frequency: 50 - 60 Hz (Mains version)

  6
• OR 2 x Mercury Controllers connected to ports 1 and 2

  6
• Maximum supply current: 500 mAmps

  6
• Typical supply current: <100 mAmps

  6
• Operating temperature range: +50C to +500C

  6
• Operating Humidity: 80% maximum

  6
• Storage temperature range: -200C to +650C

  6
• Environmental: Indoor use at altitudes up to 2000m, Pollut

  6
• Installation Category II.

  6
• Voltage fluctuations not to exceed ±10% of nominal voltage

  6
• Size: 300mm (L) x 35mm (H) x 110mm (W)

  6
• Weight: 300 Grams

  6
• Safety: EN61010

  6
• EMC: EN61326; 1997 +Amdt. A1; 1998

  6
• Ventilation: There is no requirement for forced cooling ve

  6
• Class 2 Insulation: No protective Earth is required and non

  6
• The host equipment must provide a suitable external over-cur

  6
• Fuse: 1A 240 Vac Antisurge (T) HRC conforming to IEC 6012

  6
• Or MCB: 1A, 240 VAC Type C conforming to BS EN 60898

  6
  • Mounting

    6
• There is a fixing lug at each end of the Hub, with hole cent

  6
  • RS232 Cable Lengths

    6
• Port number

  6
• Main Powered Hub

  6
• Mercury Powered Hub

  6
• 1

  6
• 15 metres

  6
• 5 metres

  6
• 2

  6
• 15 metres

  6
• 5 metres

  6
• 3

  6
• 15 metres

  6
• 15 metres

  6
• 4

  6
• 15 metres

  6
• 15 metres

  6
• 5

  6
• 15 metres

  6
• 15 metres

  6
• 6

  6
• 15 metres

  6
• 15 metres

  6
• 7

  6
• 15 metres

  6
• 15 metres

  6
• 8

  6
• 15 metres

  6
• 15 metres

  6
• 9

  6
• 15 metres

  6
• 15 metres

  6
• 0

  6
• 15 metres

  6
• 15 metres

  6
  • Ethernet Cable lengths

    6
• Port number

  6
• Main Powered Hub

  6
• Mercury Powered Hub

  6
• 1

  6
• Refer to Cat5 standard

  6
• Refer to Cat5 standard

  6
• 2

  6
• Refer to Cat5 standard

  6
• Refer to Cat5 standard

  6
• Uplink

  6
• Refer to Cat5 standard

  6
• Refer to Cat5 standard

  6