ASA Electronics WVOM74Q マニュアル

目次

• KEY FEATURES:

  2
• IMPORTANT SAFETY PRECAUTIONS

  2
• To comply with the FCC/CE limitation for class B device and to avoid interference, please follow manufacturer’s installation instruction. KIT CONTENT

  3
• INSTALLING THE CAMERA

  5
  • With fixed power source

    5
  • Using the trigger cable

    6
    • Note: It is strongly recommended to keep the system in QVGA mode with better FPS to ensure smooth images. STOP BACKING when [NO SIGNAL] shows on the monitor.

      6
  • With battery pack (not included in the package)

    6
• INSTALLING THE MONITOR

  7
• GETTING TO KNOW YOUR CAMERA

  9
• GETTING TO KNOW YOUR RECEIVER

  10
  • Monitor Function Buttons

    11
  • Monitor Display Icons

    11
  • Signal Indicator shows signal strength as below:

    11
  • Channel Indicator shows your current active camera.

    11
  • Status Indicator appears when the monitor receives no signal.

    11
• CONFIGURING YOUR RECEIVER

  12
  • Press the Power button to power ON the monitor. Press and hold to power OFF the monitor.

    12
  • Scan frequency

    12
  • Camera setting (CAM 1 – 4)

    12
  • Pairing camera(s)

    13
    • IMPORTANT:

      13
    • Before pairing the camera, make sure camera power cord is well connected to a constant 12-24V DC power source. Please refer to the With battery pack section and follow the instruction in the Installing the Camera chapter to install the camera properly.

      13
    • 1. Press (MENU button) to choose the channel 3 in the Pair CAM function and start the pairing process.

      13
    • 2. System will count down within 60 seconds, system message as shown:

      13
    • 3. Within 60-second count down, press the Link Key on the camera cable

      13
    • 4. Once pairing completed, the monitor will display the camera image immediately.

      14
  • Brightness

    14
  • Monitor and Camera Version

    14
  • Factory Reset

    15
  • Setting SCAN Mode

    15
    • 1. Press (MENU button) and use (Left / Right) to turn all available channels ON.

      15
    • 2. Press (SCAN button) to enter SCAN Mode.

      15
    • 3. The camera images will be displayed periodly in scan mode. Unavailable channel will be displayed as blank screen.

      15
    • To leave SCAN display, please press (Left / Right / Up / Down) to go to the specified channel.

      15
  • Setting QUAD Display

    15
    • 1. Press (MENU button) and use (Left / Right) to turn all available channels ON.

      15
    • 2. Press (QUAD button) to enter QUAD Mode.

      15
    • 3. All camera images will be display on the monitor at the same time. Unavailable channel will be displayed as blank screen.

      15
    • To leave QUAD display, please press (Left / Right / Up / Down) to go to the specified channel.

      16
    • IMPORTANT:

      16
    • 1. This function is available for multi cameras user. Before setting QUAD display, make sure all cameras are paired to assigned channels. Please refer to the Pair CAM section for instruction.

      16
    • 2. To display properly, TURN ON all available channels PRIOR to entering into QUAD mode.

      16
• TROUBLE SHOOTING

  17
• PRODUCT SPECIFICATION

  18