Bose 161 マニュアル

目次

• Where to find …

  3
• Before you begin

  3
• For your records

  3
• Unpacking

  4
• Placing your Bose 161™ speakers

  4
  • Figure 1

    4
    • Locations for attaching rubber feet to the bottom of the speakers

      4
• Choosing speaker cord

  4
• Preparing speaker cord

  5
• Connecting speaker cord to the speakers

  5
  • Figure 2

    5
    • Making speaker wire connections

      5
• Connecting speaker cord to your receiver or amplifier

  5
• Testing speaker connections

  6
  • 1. Center the balance control on your receiver or amplifier. Set it for MONO, if you have that option, and turn it on.

    6
  • 2. Place the 161™ speakers less than 6 inches (15 cm) apart, facing each other.

    6
  • 3. Play some deep bass passages of music.

    6
• Mounting your speakers on a wall

  6
  • 1. Hold the mounting template in position and mark holes for the mounting hardware. If you plan to feed wires through the wall, mark the speaker wire pilot hole also.

    6
  • 2. Drill holes for the chosen mounting hardware.

    6
  • 3. Mount bracket part A to the wall and mount bracket part B to the rear of the speaker (Figure 3).

    6
  • 4. Secure the speaker with bracket part B to bracket part A using screw C. To adjust the angle, loosen screw C slightly, move the speaker up or down, and retighten screw C.

    6
  • Figure 3

    6
    • Speaker-bracket installation

      6
• Cleaning your speakers

  4
• Troubleshooting

  4
• Technical information

  7