ユーザーズマニュアル目次Overview of Cisco700 SeriesRouters1Product Features2Dial-On-Demand Routing2SPID and Switch Automatic Detection2TFTP Client2Profile-Based User Name and Password3Bandwidth Allocation Control Protocol and Bandwidth Allocation Protocol3NetBIOS Over TCP/IP Packet Filter4NetBIOS Name Spoofing4Automatic Configuration From BOOTP4DHCP Server4DHCP Relay Agent5Port Address Translation5IP Address Assignment Through IPCP5IP RIP Update Linkup5Force Dynamically Negotiated IP Addresses6Fee Pulse Mode6Call Transfer6Call Forwarding (Sweden and Finland)7Three-Way Call Conferencing7Data Call Button (Cisco770 Series Router Only)7Table1-1 Cisco770 Series Data Call Button Operation Summary7Second Number Fail-Over7IPX Support8IPX Ping8Default IPX Route8IPX SAP Filtering8Service Advertising Protocol (SAP) Helper9Route Summarization9Data Compression9Security Features9Leased Line Authentication Requirement Removed10SNMP Support10SNMP Community Names10Supported MIBs11MIB II11IEEE 802.1d Bridge MIB11Supported RFCs12Router Panels12Figure1-1 Front Panel, Cisco760Series Router (Cisco766 Shown)13Figure1-2 Front Panel, Cisco770Series Router (Cisco776 Shown)13Figure1-3 Rear Panel, Cisco761 Router14Figure1-4 Rear Panel, Cisco762 Router14Figure1-5 Rear Panel, Cisco765 Router14Figure1-6 Rear Panel, Cisco766 Router15Figure1-7 Rear Panel, Cisco771 Router15Figure1-8 Rear Panel, Cisco772 Router15Figure1-9 Rear Panel, Cisco775 Router16Figure1-10 Rear Panel, Cisco776 Router16Specifications17Table1-2 System Specifications—Cisco 700 Series Routers17Table1-3 Cisco 700 Series Router Interfaces by Model18サイズ： 164KBページ数： 18Language: Englishマニュアルを開く
ユーザーズマニュアル目次Cisco700 Series Router Cabling and Setup QuickStartGuide1Parts List1Verify the PC Setup2Connect a 760 Series Router to a PC or Hub2Step 1 If you are connecting the router to a computer, connect the yellow Ethernet cable from the...2Step 2 If you are connecting the router to a computer, to a hub, set the node-hub switch to the “...2Connect a 770 Series Router to a PC or Hub3Step 1 If you are connecting to a computer, connect a yellow Ethernet cable from a yellow Etherne...3Step 2 If you are connecting to a hub, connect an Ethernet crossover cable (not included) from a ...3Connect the ISDN Line4Connect a Cisco 762 or Cisco 776 Router to the ISDN Line4Step 1 Connect the red ISDN U cable to the red port labeled ISDN U on the rear panel of your router.4Step 2 Connect the other end of the ISDN U cable directly to an RJ-45 ISDN wall jack.4Connect a Cisco 761 or Cisco 775 Router to the ISDN Line4Step 1 Outside North America, connect the orange ISDN S/T cable to the orange ISDN S/T port on th...4Step 2 Connect the other end of the ISDN S/T cable to the ISDN wall socket.5Connect the Power and Turn On the Router5Step 1 Connect the power supply cable to the round, black power connector on the rear panel of th...5Step 2 Turn on the router by using the on/off switch on the rear panel. The green RDY LED (and th...5Setup the Router to Access a Corporate Network or Internet Service Provider6CiscoFast Step Software6Step 1 Double-click the My Computer icon.6Step 2 Double-click the CD icon.6Step 3 Double-click the ImLanguageSelect.exe icon, and follow the on-screen instructions.6Step 4 Uncompress the Cisco Fast Step files, retaining the directory structure.6Step 5 Double-click the Setup.exe icon in the disk1 directory, and follow the on-screen instructi...6RVS-COM Lite Support6RVS-COM Lite Installation6サイズ： 231KBページ数： 8Language: Englishマニュアルを開く
