ユーザーズマニュアル (J9000A)目次GROUNDING1SPECIFICATIONS1APPLICATION1SAFETY1ANTENNA LOCATION1MOUNTING1ASSEMBLY21. Find the molded antenna mount (3) and four 8-32 nylon lock nuts (4). Use the nuts to attach the mount to the exposed studs on the back of the antenna.22. Find the molded articulating arm (2). Also, find a 1/4"-20 x 1-1/4" machine screw (5), 1/4" lock washer (6), 1/4" flat washer (7), and 1/ 4"-20 hex nut (8). Use hardware to secure the molded arm to the antenna mount as shown in Figure-1.23. For installation on flat surfaces, find the molded wall/mast mount (1) and use it as a drill template to mark hole locations....24. For pole or mast installations, find two worm clamps (11) and install as shown on the molded wall-mast mount (1). Encircle pole with each band and tighten.25. To attach the antenna assembly to the wall/mast mount, find a 1/4" x 1-1/4" machine screw (5) and install a 1/4" lock washer ...26. Loosen 1/4"pivot screws as needed to position antenna for desired azimuth and elevation steering. When antenna is in adjusted, tighten all hardware securely.2Hardware for MountingAntenna J9000A2J9000A Radiation Plots, E Plane3J9000A Radiation Plots, H Plane4サイズ： 720KBページ数： 4Language: Englishマニュアルを開く
