JAI TM-6760 マニュアル

目次

• Notice

  3
• Warranty

  3
• Certifications

  3
• WARNING

  4
  • Table of Contents

    5
  • List of Figures

    7
  • List of Tables

    9
• TM-6760 Series Progressive Scan Shutter Cameras

  11
  • Operation Manual

    11
    • 1 Introduction

      11
      • 1.1 Product Description

        11
      • 1.2 Features

        12
      • 1.3 Functional Options

        13
      • 1.4 System Configuration

        14
        • FIGURE 1. TM-6760 System Configuration

          14
        • FIGURE 2. TM-6760CL System Configuration

          14
    • 2 Installation

      15
      • 2.1 Getting Started

        15
        • 2.1.1 Unpacking Instructions

          15
        • 2.1.2 Components List

          15
        • 2.1.3 Accessories and Options

          15
      • 2.2 Camera Setup

        16
        • 2.2.1 Heat Dissipation

          16
          • 1. Mount the camera on a large heat sink (camera bracket) made out of conductive material like aluminum.

            16
          • 2. Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conducting material like plastic.

            16
          • 3. Make sure the camera has enough open space around it to facilitate the free flow of air.

            16
          • 4. If possible, use a cooling fan to set up a positive air flow around the camera.

            16
        • 2.2.2 Connector Pin Configurations

          16
        • 2.2.2 (a) 12-Pin Connector (TM-6760)

          16
          • FIGURE 3. 12-Pin Connector on Rear Panel of Camera

            16
          • TABLE 1. 12-Pin Connector (TM-6760)

            16
        • 2.2.2 (b) 12-Pin Connector (TM-6760CL)

          16
          • TABLE 2. 12-Pin Connector (TM-6760CL)

            16
        • 2.2.2 (c) Digital Output Connector (TM-6760 only)

          17
          • FIGURE 4. 31-Pin Digital Connector on Rear Panel of Camera (TM-6760 only)

            17
          • TABLE 3. 31-Pin Connector (MP211-031-113-4300)

            17
        • 2.2.2 (d) Camera Link Connector

          18
          • TABLE 4. Connector Pinout Configurations (10226-6212 VC)

            18
        • 2.2.2 (e) Analog Output Connector

          19
        • 2.2.3 Shutter Speed Control Dial (TM-6760 only)

          19
          • TABLE 5. Shutter Speed Control Dial

            19
        • 2.2.4 RS-232 Communication Cable (TM-6760 only)

          19
          • FIGURE 5. Serial Communication Cable RS-232B-12

            19
        • 2.2.5 Digital Output Cable (TM-6760 LVDS model only)

          20
          • FIGURE 6. Pinout Configuration for Digital Output Cable

            20
        • 2.2.6 Camera Link Cable (TM-6760CL only)

          21
        • 2.2.7 Power Supplies and Power Cable Setup

          21
        • 2.2.7 (a) Power Supplies

          21
        • 2.2.7 (b) JAI, Inc. Power Cables

          22
          • FIGURE 7. 12P-02S Interface Cable (optional)

            22
        • 2.2.8 Attaching the Analog Video Output

          22
        • 2.2.9 Attaching the Camera Lens

          23
    • 3 Operation

      24
      • 3.1 Camera Rear Panel (TM-6760, LVDS model only)

        24
        • 3.1.1 Up/Down Switch

          24
        • 3.1.2 Digital Output Connector

          24
        • 3.1.3 Analog Output Connector

          24
        • 3.1.4 Power, RS-232, and External Sync Connector

          24
        • 3.1.5 Shutter Speed Control Switch

          24
        • 3.1.6 Mode Selection Switch

          24
          • TABLE 6. Mode Selection Switch

            25
      • 3.2 Camera Rear Panel (TM-6760CL)

        26
        • 3.2.1 Digital Output Connector (Camera Link Connector)

          26
        • 3.2.2 Analog Output Connector

          26
        • 3.2.3 Power and External Sync Connector

          26
      • 3.3 Progressive Scanning

        27
      • 3.4 Electronic Shutter

        27
      • 3.5 Integration

        28
      • 3.6 Asynchronous Reset

        28
        • 3.6.1 External VINIT With Pulse Width (No-Delay Shutter)

          28
          • FIGURE 8. Pulse Width Async Shutter Timing

            29
        • 3.6.2 Internal Shutter Speed Control

          29
      • 3.7 Dynamic Range Control

        30
        • 3.7.1 Programmable Look-Up Table (LUT) and Knee Control

          30
      • 3.8 Programmable LUT and Knee Control (patent pending)

        31
      • 3.9 Scan Modes

        32
        • 3.9.1 Full Progressive Scan

          32
        • 3.9.2 Partial Scan

          32
        • 3.9.3 Two-Row Binning

          32
      • 3.10 External Sync and Pixel Locking

        32
      • 3.11 Bayer Color Filter (TMC-6760 and TMC-6760CL)

        32
        • 3.11.1 Color Filter Array

          33
        • 3.11.2 Bayer Color Filter Array (CFA)

          33
          • FIGURE 9. Bayer Color Filter Array

            33
        • 3.11.3 Starting Pixel Configuration

          34
          • FIGURE 10. Starting Pixel Configuration

            34
        • 3.11.4 Sync and Data

          34
          • FIGURE 11. Sync and Data

            35
        • 3.11.5 Camera Functions

          35
          • TABLE 7. Basic Mode Selections (For Non-CL Versions)

            36
            • FIGURE 12. TM-6760 Series Camera Rear Panel

              36
        • 3.11.6 Interpolation Software

          37
          • TABLE 8. Framegrabber Interpolation Software List

            37
        • 3.11.7 Color Interpolation

          37
      • 3.12 Camera Timing Charts

        38
      • 3.13 Serial Communication Kit CS-232C (not required for “CL” version)

        42
    • 4 Troubleshooting

      43
      • 4.1 Problems and Solutions

        43
        • 4.1.1 Symptom: No Video

          43
        • 4.1.2 Symptom: Dark Video

          43
        • 4.1.3 Symptom: Non-synchronized Video

          43
      • 4.2 Information and Support Resources

        44
    • 5 Appendix

      45
      • 5.1 Specifications

        45
        • TABLE 9. TM-6760 Series Product Specifications Table

          45
    • TM-6760 Series

      45
    • 1/2" progressive scan interline transfer CCD

      45
    • 5.83mm (H) x 4.36mm (V)

      45
    • 648 (H) x 484 (V)

      45
    • 9.0µm x 9.0µm

      45
    • 648 x 484 pixels at 60 Hz/30 Hz

      45
    • Internal/external auto switch

      45
    • HD/VD, 4.0 Vp-p impedance 4.7K ohms

      45
    • 60Hz/30Hz±2%, non-interlace

      45
    • HD=31.486/15.743 kHz±2%

      45
    • 25.00/12.50 MHz

      45
    • Digital: 648 (H) x 484 (V)

      45
    • 48dB min. (AGC off)

      45
    • 1.0 lux f=1.4 (no shutter) @60fps

      45
    • Sensitivity: 10µV/ e-

      45
    • Analog: 714mV, 75 ohms (900 mV white clip)

      45
    • Digital output: 8-bit RS-644 output

      45
    • Camera Link (TM-6760CL only)

      45
    • OFF

      45
    • Programmable LUT (1.0 std.)

      45
    • C-mount (use 1/2" format lenses or larger)

      45
    • 12V DC±10%, 380mA normal (current measured at 25°)

      45
    • 7Grms (10Hz to 2000Hz)

      45
    • 70G, 10-11msec

      45
    • 44mm x 44mm x 64mm (1.75" x 1.75" x 2.51")

      45
    • Without tripod mount: 133 g, 4.7 oz. (TM-6760), 138 g, 4.9 oz. (TM-6760CL)

      45
    • With tripod mount: 144.5 g, 5.1 oz. (TM-6760) 149.5 g, 5.3 oz. (TM-6760CL)

      45
    • OP 89-3 Differential Input, VINIT

      46
    • OP 89-4 Differential Input, VD

      46
    • OP 93 RS-422

      46
    • OP 93-1 10-bit output

      46
    • TM-6760: 30DG-02 digital output cable, CS-232E serial communication kit,

      46
    • TM-6760CL: 26CL-02-26 digital output cable

      46
    • PD-12UUP series (includes power connector)

      46
    • 12P-02S

      46
      • 5.1.1 Physical Dimensions

        47
        • FIGURE 13. Physical Dimensions (TM-6760, TMC-6760)

          47
        • FIGURE 14. Physical Dimensions (TM-6760CL, TMC-6760CL)

          47
      • 5.1.2 Spectral Response

        48
        • FIGURE 15. Spectral Response

          48