Kramer Electronics PL-150 マニュアル

目次

• 1 Introduction

  5
• 2 Getting Started

  5
  • 2.1 Quick Start

    5
• 3 Overview

  7
  • 3.1 Terminology Used in this User Manual

    8
• 4 Your PL-50 Power Controller - Monitor

  8
• 5 Installing in a Rack

  11
• 6 Connecting the PL-50 Power Controller - Monitor

  12
  • 6.1 Connecting the Relays

    13
  • 6.2 Controlling the PL-50 via the Ethernet Port

    13
    • 6.2.1 Connecting the ETHERNET Port Directly to a PC (Crossover Cable)

      13
    • 6.2.2 Connecting via a Straight-Through Cable

      14
    • 6.2.3 Configuring the Ethernet Port Initially

      15
  • 6.3 Controlling via the Embedded Web Pages

    17
    • 6.3.1 Setting the Embedded Web Page

      17
    • 6.3.2 The Panel Screen

      19
    • 6.3.3 The Scheduler Screen

      20
    • 6.3.4 The Channel Settings Screen

      22
    • 6.3.5 The Alerts Screen

      23
    • 6.3.6 The Power Measurement Screen

      25
    • 6.3.7 The Power ON/OFF Order Screen

      26
    • 6.3.8 The Configurations Screen

      28
      • 6.3.8.1 The Security System

        30
  • 6.4 DIP-switch Settings

    31
• 7 Operating Your PL-50 Power Controller – Monitor

  31
  • 7.1 Calibrating via the Front Panel Buttons

    31
• 8 Flash Memory Upgrade

  33
  • 8.1 Upgrading the Firmware

    33
    • 8.1.1 Download the Firmware

      33
    • 8.1.2 Connect a PC to the PL-50

      33
    • 8.1.3 Update the Firmware

      34
  • 8.2 Changing the Device Parameters

    39
• 9 Technical Specifications

  39
• 10 Kramer Protocol 3000

  40
  • 10.1 Protocol 3000 Syntax

    40
  • 10.2 Command Terms

    41
  • 10.3 Common Commands

    42
  • 10.4 Result and Error Codes

    44
  • 10.5 Security Commands

    44
  • 10.6 Network Setting Commands

    45
  • 10.7 Instruction Codes

    47