ユーザーズマニュアル目次Table of Contents6Safety2Section A - Installation7Section B - Operations13Section C - Accessories23Section D - Maintenance27Section E - Theory of Operations31Section F - Troubleshooting and Repair41Symptoms44Major physical or electrical damage is evident.44The Multi-Weld 350 is completely dead. The meters do not light and the input contactor does not activate when the ON/OFF....44The meters light, but the input con-tactor does not activate when the ON/OFF Mode Selector switch is...45The Thermal Light is on. The Multi-Weld 350 does not have output. The fan operates normally.45The Multi-Weld 350 does not have output. The meters turn on, the input contactor activates and the Thermal light is off.46The preset amps (CC mode) or volts (CV mode) are not adjustable.47The preset range is not correct.47The meters do not light in either CV or CC modes.48One or both of the meter’s readings are not accurate.48The fan motor does not run when the machine is turned on.49The fan does not run when welding.49The welding output is high with no control.50No control of welding output.50When welding in the Stick Mode, the current changes with arc length.51When using “fast freeze” type electrodes such as E6010 or E7010, the welding performance is poor.51The arc starting is not satisfactory.52When stick welding the electrode “stubs”.52Section G - Electrical Diagrams101サイズ: 4.03MBページ数: 119Language: Englishマニュアルを開く