ユーザーズマニュアル目次CONTENTS2Introduction4DVR Introduction4Main Features and Functions4LIVE SURVEILLANCE4COMPRESSION FORMAT4RECORD MEDIA4BACKUP4RECORD & PLAYBACK4ALARM4PTZ CONTROL5COMMUNICATION PORT FOR PTZ CAMERAS5NETWORK5Panel Functions6Check Accessories6Front Panel & Interface Terminals6Rear Panel8Remote Control Introduction9Using Remote Control9Open the battery cover of Remote Control.9Put in two AAA batteries with poles aligned correctly.9Replace the battery cover.9If the Remote Control does not work, please check the following:9Remote Control9The layout of the remote control is shown below.9Basic Operation Guide11How to Start DVR11Connect the DVR to AC adaptor and plug in.11Turn on the DVR.11Wait for the DVR to initialize.11Basic operation of TFT LCD Monitor Screen11The basic operation of TFT LCD monitor screen is shown below:11TFT LCD Monitor Screen Open.11Main Menu Setting12Press the "Menu" button, input username and password in the Login interface (as Fig. 3.1), and then you will see the Main Menu (as Fig. 3.2).12Move the cursor, and the selected items will be highlighted in yellow12Press "Enter" key to enter the sub-menu, and press "Menu" key to get back to Main Menu12Basic Configuration13VIDEO FORMAT13TIME POSITION13Language13DVR NAME13Press "A" button to switch the inputting mode from letters to numbers13Modify the DVR name.13Press "Enter" key to confirm the operation.13DVR ID14Move the cursor to the item.14Press "Enter" key to modify numbers.14Enter three numbers, and then press "Enter" key to confirm the modified entry.14Press "OK" button to confirm the operation.14DATE FORMAT14TIME ADJUSTMENT14Move the cursor to the item.14Modify numbers by using "+" and "-" buttons.14Press "Enter" key to confirm the operation.14BUZZER ALARM14Live Configuration14CHANNEL14Move the cursor to the item.14Press "Enter" key to select the channel14CHANNEL NAME14Press "A" button to switch the inputting mode between letters and numbers.14Enter channel name.15Press "Enter" key to confirm the operation.15SHOW NAME15CHANNEL HIDE15CHANNEL COLOR15COPY CONFIG TO15Select the channel you want to copy this channel to, or select ALL to copy the configuration to all other channels.15Press "COPY" button.15Press "Enter" key to confirm the operation.15Record Configuration15VIDEO RESOLUTION15RECYCLE15PRERECORD TIME16TIME STAMP16CHANNEL16Move the cursor to the item.16Press "Enter" key to switch the channel and select.16VIDEO QUALITY16AUDIO16SCHEDULE RECORD16Move the cursor to "SCHEDULE RECORD" option16Check "SCHEDULE RECORD", and the “Setup” window will pop up.16Press "Setup" to enter the Schedule Setup menu.16In the Schedule Setup menu, move the cursor to select a day, and check “whole day” if you want to record all of the time.16If you only want to record certain time periods press "Enter" key to set up time.16Press "+" and "-" buttons on the front panel to modify the time.16Press "Enter" key to confirm the setup.17FRAME RATE SETUP17COPY TO17Alarm Configuration17MOTION ALARM17HOLD TIME18CHANNEL18Move the cursor to the channel.18Press "Enter" key to switch the channel and select.18DETECTION18SENSITIVITY18TO REC18ALARM OUT18SCHEDULE18AREA18Move the cursor to “setup”.18Press "SETUP" button to enter the Area Setup submenu.18In the Area Setup submenu, choose "CUSTOM" option.19Press "Enter" key to confirm the operation.19Press "Up", "Down", "Left" and "Right" buttons to choose the area which needs to be detected19Press "Enter" key to select or cancel the area.19Press "Esc" button to confirm the option and exit "CUSTOM" option.19Press "BACK" option to go back the Motion Alarm Configuration menu.19COPY TO19SENSOR ALARM19HOLD TIME20SENSOR20Move the cursor to the "SENSOR" option.20Press "Enter" key to switch the Sensor.20DETECTION20TYPE20TRIGGER RECORD20Move the cursor to "TRIGGER RECORD" option.20Select the channel you want that sensor to trigger.20Press "Enter" key to confirm the operation.20ALARM OUT20SCHEDULE20COPY TO20OTHER ALARM21PTZ Configuration21CHANNEL21BAUDRATE21PROTOCOL21ADDR21PRESET21Press "SET" button to enter Preset submenu shown in Fig. 3.15. There are 16 preset points that can be set in every channel.21In Preset submenu, press "Enter" button to switch the preset point needing to be reset.22Press "ADJUST" button to enter PTZ mode.22On the front panel, press "ZOOM", "FOCUS", "SPEED", "IRIS", "+" (MENU) and "-" (PTZ) buttons to modify the position of the preset point.22Press "UP", "DOWN", "RIGHT" and "LEFT" buttons to rotate the Speed Dome.22Press "ESC" button to come back to Preset menu.22Press "SAVE" button to save the setting, and press "CANCEL" to discard the setting.22COPY TO22User Configuration22AUTHORIZATION CHECK23USER23PASSWORD23AUTHORIZATION23Move the cursor to "User" option, then press "Enter" key to switch to the user whose authorization you want to modify.23Move the cursor to "SETUP" button on the screen.23Press "Enter" key, Authority Setup menu (refer to Fig. 3.17) will pop up.23In the Authority Setup menu, move the cursor to "DEFAULT".23Press "Enter" key. The default authorization will be set.23NEW USER23Move the cursor to "ADD" button on the screen.23Press "Enter" key, the Add User menu will display.23Input username and password.23Press "OK" button to confirm the option.23DELETE USER24Move the cursor to the "DEL" button on the screen.24Press "Enter" key to confirm the operation. When a user is deleted, the username and password will no longer exist in the system.24Network Configuration24BASIC CONFIGURATION24Move the cursor to “Basic configuration”.24Press "Enter" key to enter the Basic Configuration menu.24NET SERVER24NET VIDEO QUALITY24IP CONFIGURATION24Input IP Address, Subnet Mask and Gateway25Press "OK" button to modify the IP Configuration menu.25DDNS CONFIGURATION26Manager Tools26SHUTDOWN SYSTEM26Enter the SHUTDOWN submenu.26Press "Enter" key to confirm the operation.26DISK MANAGER26QUICK FORMAT27FORMAT27Select "FORMAT" button.27Press "Enter" key, a warning will pop up: ‘Format will erase all data on this hdd! Format now? ’27Press "OK" button to format the HDD; Press "CANCEL" or "ESC" button to cancel this operation.27SYSTEM LOG27LOCAL, NET, AND OTHER27Check the corresponding items of local operation, network client operation and other operation first. (Note: VLOSS is video loss)27TIME27Press "OK" button to view the event log; Press "CANCEL" or "ESC" button to cancel this operation.27SYSTEM INFORMATION28UPDATE FIRMWARE28Make sure the firmware update is on the USB flash drive.28Enter the menu after word-‘USB’ is displayed on the live mode.28Move the cursor to "UPDATE" button.28Press "Enter" key to start updating.28After the program is upgraded, the system will restart.28LOAD DEFAULT28IMPORT CONFIGURATION & EXPORT CONFIGURATION29This function is used to help users manage multiple DVRs conveniently. When users need to set up the same parameters in more than one DVR, they can copy one DVR’s setting to all others without setting them up one by one.29EXPORT CONFIGURATION can copy one DVR’s parameter settings to a USB flash drive; and then use IMPORT CONFIGURATION to input the settings copied onto the USB flash drive from the first DVR to another DVR.29CLEAR ALARM OUT29Shortcut Menu29PTZ29SPEED29In PTZ mode, press "Speed" button.29Press "+" and "-" buttons to change the rotational speed.29Press "Up", "Down", "Left" and "Right" buttons to rotate the Speed Dome to a certain position.29ZOOM30In PTZ mode, press "ZOOM" button.30Press "+" and "-" buttons to zoom in and zoom out.30FOCUS30In PTZ mode, press "FOCUS" button.30Press "+" and "-" buttons to control focus.30IRIS30In PTZ mode, press "IRIS" button.30Press "+" and "-" buttons to change the brightness of the Speed Dome.30Search30PLAYBACK30Select the Date30In Playback menu, move the cursor to Calendar30Press "Enter" key to enter the Calendar submenu.30Search by Time31In Calendar submenu, select date.31Press "Enter" key to enter the Playback submenu, refer to Fig. 3.38.31Press "Enter" key to select channels.31Select time of the day31Select "PLAY" button.31Press "Enter" key to play the record.31Search by Event31In Playback submenu, select the camera and date. The dates having recorded events are highlighted in red.31Move the cursor to event option.31Press the "Down" button to move the cursor to "EVENTS" button in the submenu.31Press "Enter" key to enter the event list.31Vies the list information.31Choose an event record.32Press "Enter" key to play back the record32Press "Stop" button to get back to live display mode.32BACKUP & VIEW BACKUP32BACKUP32BACKUP MEDIA32BACKUP FILE32START TIME32END TIME32CHANNEL32EVENTS32BACKUP33Press "BACKUP" button, the backup information of DVR will display on the screen (refer to Fig. 3.40).33Press "START" button, and backup will start.33When the backup is over, the system will pop up a dialog box saying ‘BACKUP COMPLETELY’.33VIEW BACKUP33DELETE33Press "Enter" key to enter the Delete submenu.33Press "Enter" key to select the record.33Move the cursor to "DELETE" button and press "Enter" key, information will be given as below:33Select "OK" button.33Press "Enter" key to delete this record.33LOCK/UNLOCK34Information34Other34Remote Surveillance35Accessing DVR35Accessing DVR Over a Network35Input IP address, Subnet, and Gateway, please refer to section 3.2.7 Network Configuration. If using DHCP, please enable DHCP in both of DVR and router.35Enter “Video” submenu to set network video parameters like resolution, frame rate, etc.35Open an Internet Explorer browser on a computer on the same network. Input the IP address of the DVR in an Internet Explorer textbox and hit enter.35Internet Explorer will download ActiveX automatically. (Notice: Internet Explorer must be set up to permit downloading ActiveX controls. Please refer to Q7 in FAQ chapter) Then a window pops up and asks for user name and password.35Input name and password correctly, and enter. It will show the picture below:35Accessing DVR Over the Internet36When accessing the DVR over the Internet, in addition to the above steps, you would then need to forward port 80 on the router the DVR is attached to, to the IP address of the DVR. You can get instructions on how to do this for most popular routers by...36Fig 4.1.136Fig 4.1.236Main Interface37Login37Click button to input username and password in the login window37Press "Enter" key to login.37Snap Picture37Parameter Settings37Record38Click "DVR Record" button.38Select "Start Record" in drop down list to record.38Select "Stop Record" in drop down list to stop recording.38Camera Audio (for cameras that have microphones)38When you are in live display mode or playback mode, select a channel to display in Large Picture mode.38Right-click the image and then select "Open Audio" to play the camera’s audio.38Click button to turn the audio up or down.38DVR Status Panel38Grey light: Normal State38Green light: Manual Record State38Yellow light: Motion Detection Record State38Red light: Sensor Alarm Record State38Blue light: Video Loss State38Remote Playback and Search38Remote Playback38: Play /Pause.39: Stop.39: Next frame. This button will be valid when playback is paused.39You can adjust the speed for playing record in the area shown as Fig 4.6 Speed.39Click button to play the selected record.39Other Functions40BACKUP40TIME BACKUP40Select time and record type.40Select camera.40Press "Browse…" button to select the folder with saved backup files.40Select cameras that you want to backup.40Select the type of backup file.40Click "Backup Now" button, backup will begin.40EVENT BACKUP40Select time and record type.40Select camera.40Press "Browse…" button to select the folder with saved backup files.40Select cameras that you want to backup.40Select the type of backup file.40Click "Select Event" button to enter Select Event window shown as Fig 4.9 Select Event.40Choose event and press ">>" button to go to backup list,41Click ">>>>" to choose all events.41Choose event list and press"<<" button to clear selected event; click "<<<<" button to clear all events.41Click "OK" button to run the backup.41LOCK /UNLOCK41Click button to enter Remote Lock window as Fig 4.10 Remote Lock.41Select time and record type.41Select camera.41Click "Select Event" button, system will find the corresponding event and pop up the LOCK EVENT window shown as Fig 4.11 Lock Event.41Check the check box to change lock status.41Click "OK" button to confirm the operation.41Remote DVR Configuration42Basic Configuration42Video Format43Time Position43DVR Name43DVR No.43Date Format43Buzzer43Live Configuration43LIVE CONFIGURATION44Channel44Channel Hide44Show Name44Channel Name44COLOR SETTINGS44Channel44Brightness /Contrast /Saturation /Hue44Record Configuration44Parameter Setting45Schedule Record45Click the check box of the Schedule Record, and it will be active. The default schedule time is every day.45Click "Set Schedule" button, and Schedule Configuration window will pop up as Fig 4.17 Schedule Configuration.45Click "Eraser" button and click on the weekday schedule to delete the time; Click "Add" button and click on the weekday schedule to add the time.45Alarm Configuration45Network Configuration45User Configuration45Management Tools45DISK MANAGEMENT46FIRMWARE UPDATE46Select the path to the updating file.46Click "Start" button, the updating progress bar will appear. The Update dialog box is shown as Fig 4.18 Firmware Update.46After finishing the update, the DVR needs to reboot to run the new firmware.46LOAD DEFAULT46SYSTEM INFORMATION46SYSTEM LOG46Remote PTZ46PARAMETERS46Channel47Baud Rate47Protocol47Address47PTZ CONTROL INTERFACE47Operation with a Mouse48Switching Display48Enter Menu List48Search48Configuration48PTZ Control48FOCUS49ZOOM49IRIS49Stop Record/Start Record49This menu is for starting and stopping recording.49Stop record49Click this item and the DVR will stop recording. At the same time, this item will change into “start record”.49Start Record49Click this item, it will enable recording and the item will change into “stop record”49Fast Reverse and Fast Forward49Mobile Surveillance50By Smart Phone with WinCE Operating System50First, activate the network access on the mobile phone, and then run “Internet Explorer”.50Input the public IP address you need to use to connect as shown below (see 4.1.2 Accessing the DVR over the Internet):50Click on the software name. A dialog box will pop up.50Click “Yes” to download and install.51PCam will be opened after installed.51Input the server’s address, ID, and password respectively in the columns of “Server”, “User”, and “Password”. Then click “Go” to login to the DVR. It will show the picture if accessed successfully.51Camera 1 is the default display after login. Change the camera in the drop down menu of “Channel”.52By Smart Phone with Symbian Operating System52First, enable the network access on mobile phone, and then run Web browser.52Input the DVR server’s IP address in a new-built bookmark (see 4.1.2 Accessing the DVR over the Internet). Click this bookmark to connect with the DVR.52A welcome window will pop up with a link to download the software. Click “install package” to download.52The security window will pop up after downloaded and ask if you want to install the package. Click YES to install.53A Scam shortcut icon appears on the system menu after finished.53Run Scam program.53Click Options--->Settings to enter login interface.54Input the server’s address, ID and password respectively. Then click OK to login to the DVR. (See 4.1.2 Accessing the DVR over the Internet)54It will show the camera after accessing successfully.54Frequently Asked Questions55Standards & Specifications58Record Capacity59Abbreviation59Customer Information Card61サイズ: 3.96MBページ数: 61Language: Englishマニュアルを開く