Radio Shack 43-3261 マニュアル

目次

• Attach the Mounting Bracket

  1
  • 1. Position the mounting bracket as shown.

    1
  • 2. Align the bracket tabs with the slots on the phone’s base.

    1
  • 3. Snap the bracket into place.

    1
• Mount and Connect the Phone

  1
  • On a Wall

    1
    • 1. Drill two vertical holes 315/16 inches apart.

      1
    • 2. Thread a screw (not supplied) into each hole, letting the heads extend about 3/16 inch from the wall.

      1
    • 3. Fit the keyhole slots over the screw heads and slide the phone downward to secure it.

      1
  • On a Wall Plate

    1
  • Connections

    1
    • 1. Connect the coiled handset cord to the jacks on the base and the handset.

      1
    • 2. If your phone is mounted on the wall, connect the long line cord to the phone’s LINE jack. Connect the other end to a wall jack.

      1
    • 3. If your phone is mounted on a wall plate, connect the short line cord to the phone’s LINE jack. Connect the other end to a wall jack.

      1
• Making and Receiving Calls

  2
  • Making a Call

    2
  • Receiving a Call

    2
• Storing Telephone Numbers

  2
  • 1. Lift the handset.

    2
  • 2. Press STORE.

    2
  • 3. To store phone numbers, key in the desired telephone number, and then press STORE. Then, press 0-9 to select the storage location.

    2
  • 4. To delete a stored number, simply store a new number in its place.

    2
• Service and Repair

  2
• Limited 1-Year Warranty

  2
  • Surge Protection

    2