Sony bravia kdl-40v58xx マニュアル

目次

• NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM

  2
  • A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.

    2
  • Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used.

    2
  • When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board.

    2
  • If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse...

    2
  • Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.

    2
• Start-up Guide

  4
  • Before Use

    4
    • To check the accessories

      4
    • To insert batteries into the remote

      4
  • 1: Attaching the stand

    4
    • 1 Open the carton box and take out the stand and the screws.

      4
      • 2 Place the TV set on the stand. Take care not to interfere with cables.

        4
      • 3 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws.

        4
    • ~

      4
  • 2: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder)

    5
  • 3: Preventing the TV from toppling over

    5
    • 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand.

      6
      • 2 Install a machine screw (M4 ° 20, not supplied) into the screw hole of the TV.

        6
      • 3 Tie the wood screw and the machine screw with a strong cord.

        6
  • 4: Bundling the cables

    6
    • ~

      6
  • 5: Performing the initial Set-up

    6
    • ~

      6
  • Adjusting the viewing angle of the TV

    7
    • Adjust the angle left and right (swivel)

      7
  • Detaching the Table-Top Stand from the TV

    7
    • ~

      7
  • Safety Information

    8
  • Precautions

    9
  • Remote and TV Controls/Indicators

    10
    • Remote and TV controls

      10
      • z

        10
    • ~

      10
    • ~

      11
      • z

        11
    • ~

      12
      • Indicators

        13
      • About the operation guide on the TV screen

        13
• Watching TV

  14
  • Watching TV

    14
    • 1 Press 1 on the TV to turn on the TV.

      14
      • 2 Press DIGITAL to switch to digital or satellite mode, or press ANALOG to switch to analogue mode.

        14
      • 3 Press the number buttons or PROG +/- to select a TV channel.

        14
    • To access Digital Text

      14
    • To access Analogue Text

      15
      • z

        15
    • To change the Screen Format manually

      15
    • ~

      15
      • z

        15
    • ~

      15
• Instruction Manual

  16
  • Instruction Manual

    16
  • Navigating through the Instruction Manual

    16
    • 1 Press HOME to display the XMB™.

      16
      • 2 Press G/g to select Settings.

        16
      • 3 Press F/f to select Instruction Manual, then press .

        16
      • 4 Press F/f to select topic from the Table of Contents, then press . Use the corresponding coloured button to go to next or prev...

        16
      • 5 Press HOME to exit.

        16
    • ~

      16
      • How the switchover affects your TV equipment:

        27
      • How to re-tune:

        28
        • 1 Press "HOME" on the remote

          28
          • 2 Press G/g to select "Settings"

            28
          • 3 Press F/f to select "Digital Set-up", then press

            28
          • 4 Press to select "Digital Auto Tuning"

            28
          • 5 Press G to select "Yes" then press to start "Digital Auto Tuning"

            28
          • 6 Follow the on screen instructions.

            28
• Additional Information

  17
  • Installing the Accessories (Wall-Mount Bracket)

    17
    • To Customers:

      17
    • To Sony Dealers and Contractors:

      17
    • ~

      17
      • TV installation dimensions table

        18
        • Figures in the above table may differ slightly depending on the installation.

          18
        • The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 20) for its weight.

          18
      • Screw and Hook locations diagram/table

        19
  • Specifications

    20
    • * 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This affects the “Video Settings” menu and “Screen” menu settings. To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.

      22
    • ~

      22
  • Troubleshooting

    23
    • 1 Count how many times the 1 (standby) indicator flashes between each two second break.

      23
      • 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).

        23
    • 1 Check the items in the tables below.

      23
      • 2 If the problem persists, have your TV serviced by qualified service personnel.

        23