プリント目次1. See “LED Feedback” on page 122. 25-Pin Parallel Port: Connect the Printer Module’s 25-pin parallel port to any dot matrix printer. Note: The dot matrix printer must support a minimum of 80 columns.23. 9-Pin Serial Port: Connect the Printer Module’s 9-Pin serial port to a dot matrix printer. Note: The dot matrix printer must support a minimum of 80 columns.24. 9-pin Serial Port: Connect the Printer Module’s 9-pin serial port to a home automation module.25. 9-pin Serial Port: Connect C-Bus to the Printer Module using a null modem cable.26. 9-pin Serial Port: Connect either the Printer Module’s USB or 9-pin serial port to a computer’s COM port to view the control ...21. Hold [0] key + [installer code]12. Enter section [953] (DGP-848) [4003] (EVO)13. Enter module’s 8-digit [serial number]14. Enter [section] and enter the required [data]11. Press the [enter] key12. Enter the [installer code]13. Enter 3-digit [section] you wish to program14. Enter the required [data]1EVO Sections1Spectra Sections1EVO Sections1Spectra Sections11. Click Start (from the Windows® taskbar) a Programs a Accessories a Communications a HyperTerminal®. The Connection Description window is displayed.12. Enter a name in the Name text box and select an icon for your connection file. Click OK. The Connect To window is displayed.13. From the Connect Using drop-down list select the COM port connected to the Printer Module. Click OK. The COM Properties window is displayed.14. Click on the Bits per second drop-down list and select the baud rate that is set in the Printer Module (Section [016] Options [2] & [3]). By default, HyperTerminal® sets the Data bits at 8, the Parity at None and the Stop bits at 1. Click OK.15. The HyperTerminal® display will appear already connected to the Printer Module. Click on the Properties icon (or select Prope...1Introduction1Home Automation Interface Capabilities1Technical Specifications1Printer Requirements1LED Feedback1サイズ： 285KBページ数： 2Language: Englishマニュアルを開く
