ユーザーズマニュアル目次OPERATING INSTRUCTIONS1Technisonic Industries Limited.11.1 Controls and Display111.1.1 Front Panel Layout and Controls111.1.2 Channel Parameter Display121.2 Transceiver Basic Operation131.2.1 Selecting the Active Channel – Main or Guard131.2.2 Selecting a Main Channel Memory141.3 About Commands151.3.1 Command Levels151.3.2 Command Types161.3.3 Command Groups161.3.4 Command Reference16SECTION 2172.1 Channel Operating Parameters172.1.1 Memory Parameters172.2 Editing Channel Operating Parameters172.2.1 The Frequency Parameter192.2.2 Operating Modes202.2.3 Squelch Modes212.2.4 ID Call Operation252.3 Scan and Multi-Mode Operation262.3.1 Scan Operation262.3.2 Multi-Mode Operation272.4 Controlling User Access282.4.1 Control Access to Command Levels282.4.2 Set Command Permissions292.4.3 Control Access to Squelch Modes312.4.4 Control Editing of Memories312.4.5 Control Display of Frequency Information322.5 Encrypted Operation332.5.1 Loading Encryption Keys332.5.2 Assign KeyTag to Encryption Keys332.5.3 Assign Key by KeyTag to Memory342.5.4 Enable/Disable Encrypted Operation363.1 Operator Level 1 Commands383.1.1 Select the Operating Memory for the Main Channel383.1.2 Increase Display Brightness383.1.3 Edit Channel Operating Mode383.1.4 Scroll Backwards through Available Memories393.1.5 Start/Stop Scan393.1.6 Scroll Forewards through Available Memories403.1.7 Edit Channel Operating Frequency403.1.8 Decrease Display Brightness413.1.9 Edit Channel Squelch Mode41Analog - Noise Squelch Value41Analog - CTCSS Tone42Edit Analog - DCS Code42Edit P25 Digital - Talkgroup Value42Edit P25 Digital - NAC Value43Edit P25 Digital - ID Call Value433.1.10 Command Level Up443.1.11 Toggle memory: current/home443.1.12 Toggle Talk Around443.1.13 Erase Encryption Keys443.2 Operator Level 2 Commands443.2.1 Create/Edit All Channel Information45L2-1.1. Entering a Memory Number (refer to L1-1 for details)45L2-1.2. Enter a Scan List & Enabling/Disabling Scan (refer to L2-5 for details)45L2-1.3. Enter a Text Description (refer to L2-6 for details)45L2-1.4. Enter an Operating Mode (refer to L1-3 for details)45L2-1.5. Enter a Frequency (refer to L1-7 for details)46L2-1.6. Enter the Squelch Parameters (refer to L1-9 for details)463.2.2 Copy Guard to Main463.2.3 Lock Keypad463.2.4 L2-4 not used.463.2.5 Edit Scan List & Enable/Disable Scan463.2.6 Edit Memory Text Description473.2.7 Create Shadow Memory48L2-7.1. Selecting a Primary Memory to Base the Shadow On48L2-7.2. Create a Shadow of the Primary Memory483.2.8 Copy Main to Guard493.2.9 Encryption ON/OFF493.2.10 Command Level Up503.2.11 Command Level Down503.2.12 L2–#. Not Used.503.3 Operator Level 3 Commands503.3.1 Select Boot Channel503.3.2 Assign Key by KeyTag513.3.3 Set Numeric Edit Mode: Decimal or Hexadecimal523.3.4 Display Firmware Release and Version Information523.3.5 Edit Scan Parameters53L3-5.1. Setting the Revert Mode default: last contacted53L3-5.2. Setting the Reply Timer Range: 0-20s, Default: 3 seconds53L3-5.3. Setting the Monitor Timer Range: 1-90s, Default: 10 seconds54L3-5.4. Setting the Delay Timer Range: 0-15s, Default: 5 seconds543.3.6 Configure PTT Timer543.3.7 Side Tone Audio Level Adjust553.3.8 PC Data Upload/Download553.3.9 Display Channel Squelch Parameters563.3.10 Command Level Up563.3.11 Command Level Down563.3.12 Unused563.4 Maintenance Commands (Level 4)573.4.1 Set Default Record573.4.2 Set Restricted Level Access Mode583.4.3 Set Command Permissions583.4.4 Set Memory Edit593.4.5 L4-5. not used603.4.6 L4-6. not used603.4.7 Set Frequency Display603.4.8 Assign KeyTags to Encryption Keys603.4.9 Set Squelch Restrictions623.4.10 Command Level Up633.4.11 Command Level Down633.4.12 L4-# not used633.5 Supervisor Commands (Level 5)643.5.1 L5-1 not used643.5.2 L5-2 not used643.5.3 L5-3 not used643.5.4 Re-Set Database to Factory Defaults643.5.5 L5-5 not used653.5.6 Transparent Mode653.5.7 Edit Passwords653.5.8 Run Bootloader663.5.9 Set Unit ID (UID)663.5.10 L5-0 not used673.5.11 Command Level Down673.5.12 L5-# not used674.1 Appendix A. Installing the Jumper for Restricted Level Access.694.2 Appendix B. CTCSS Tone and DCS Code Tables704.3 Appendix C. Programming Channel data using TDP and a PC.714.4 Appendix C. 2.5 kHz & 6.25 kHz Valid Frequencies744.5 Appendix D. Default Tables75サイズ: 1.25MBページ数: 75Language: Englishマニュアルを開く