VTech adl 915 マニュアル

目次

• INTRODUCTION

  1
  • Parts Check List:

    1
• IMPORTANT SAFETY INSTRUCTIONS

  1
• REPLACING THE HANDSET BATTERIES

  1
  • REPLACING THE HANDSET BATTERIES

    1
  • SPARE BATTERY CHARGER

    1
• GETTING STARTED

  2
  • Setting Up Your VTECH 910 ADL

    2
    • 1. Choose an area near an electrical outlet and a telephone wall jack.

      2
    • 2. Connect the telephone line cord.

      2
    • 3. Plug the AC power adapter into an electrical outlet and the DC connector to the back of the base unit.

      2
    • 4. Set the TONE/PULSE switch on the base unit.

      2
    • 5. CHARGE THE HANDSET BATTERIES BEFORE USE.

      2
    • 6. CHECK FOR A DIAL TONE.

      2
• WALL MOUNTING

  2
  • 1.Choose a spot near an electrical outlet and a telephone jack.

    2
  • 2.Position the wall mount adapter on the base.

    2
  • 3.Mount the base on the wall.

    2
  • 4.Connect the telephone cord.

    2
  • 5.Connect the power cord. Plug the DC connector into the DC jack at the rear of the base unit.

    2
  • 6.Set the dial mode switch on the base unit.

    2
• HANDSET FEATURES

  2
  • IN USE LED

    2
  • BATT LOW LED

    2
  • PHONE KEY/ FLASH KEY

    2
  • CHAN KEY

    2
  • OFF KEY

    2
  • MEM KEY

    2
  • PROG KEY

    2
  • REDIAL KEY

    2
  • TONE/* KEY

    2
  • VOLUME SWITCH

    2
• BASE UNIT FEATURES

  2
  • CHARGE LED

    2
  • SPARE BATT LED

    2
  • TONE/PULSE SWITCH

    2
  • IN USE LED

    2
  • POWER LED

    2
  • PAGE KEY

    2
• OPERATING INSTRUCTIONS

  3
  • Making Calls

    3
  • Answering Calls

    3
  • Disconnecting

    3
  • Changing Channels

    3
  • Temporary Tone

    3
  • Programming The Ringer Type

    3
  • Turning Off The Ringer

    3
  • Checking The Ringer

    3
  • Memory Dialing

    3
  • Programming Speed Dial Numbers

    3
  • Speed Number Dialing

    3
  • To Change or Replace a Speed Dial Number

    3
  • Storing Pauses in Memory

    3
  • Storing a Redial Number into Speed Dial

    3
  • The Page Feature

    3
• IN CASE OF DIFFICULTY

  3
  • THE PHONE DOESN'T WORK AT ALL.

    3
  • NO DIAL TONE.

    3
  • YOU GET NOISE, STATIC, OR A WEAK SIGNAL EVEN WHEN YOU'RE NEAR THE BASE UNIT.

    3
  • YOU GET NOISE, STATIC, OR A WEAK SIGNAL WHEN YOU'RE AWAY FROM THE BASE UNIT.

    3
  • THE HANDSET DOES NOT RING WHEN YOU RECEIVE A CALL.

    3
  • YOUR CALLER FADES IN AND OUT.

    3
  • YOU HEAR OTHER CALLS WHILE USING YOUR PHONE.

    3
  • YOU HEAR NOISE IN THE HANDSET, AND NONE OF THE KEYS OR BUTTONS WORK.

    3
  • COMMON CURE FOR ELECTRONIC

    3
• WARRANTY STATEMENT

  4
• MAINTENANCE

  4
• TECHNICAL SPECIFICATIONS

  4
• FCC AND IC REGULATIONS

  4