Waves Stereo Equalizer 2500 マニュアル

目次

• Chapter 1 – Introduction

  3
  • 1.1 Welcome

    3
  • 1.2 Product Overview

    4
  • 1.3 Concepts and Terminology

    5
    •  In the Hard position, gain reduction begins immediately at the set ratio.

      5
    •  In the Med position, there is a slight fade-in to the set ratio.

      5
    •  In the Soft position, there is an even more gradual fade-in to the set ratio.

      5
    • 5
      •  In Norm mode, there is no filter and the 2500 functions like a normal compressor.

        6
        •  In Med mode, there is a slight attenuation of the low frequencies and a slight boost of the high frequencies, with a flat mid range affecting the signal into the RMS detector. This reduces pumping caused by low frequencies and increases the RMS detectors’ sensitivity to higher frequencies, affecting higher frequency signal peaks.

          6
        •  In Loud mode, a gradual linear filter attenuates level by 15dB at 20hz and increases level by 15dB at 20khz. This decreases low frequency pumping while increasing higher frequency compression.

          6
        • 7
        • 7
  • 1.4 Components

    8
• Chapter 2 – Quickstart Guide

  9
• Chapter 3 – Controls and Interface

  10
  • 3.1 Compressor Section

    10
  • 3.2 Tone Section

    12
• Chapter 4 – The WaveSystem

  17
  • Toolbar Functions

    17
    • Preset Types

      17
    • Loading Presets and Setups

      18
    • Saving Presets and Setups

      18
    • Deleting Presets

      19
    • A/B Comparison and Copying

      19
    • Toggle Buttons

      19
    • Value Window Buttons

      20
    • Sliders

      20
    • Hover Box

      20
    • Multiple Selection of Controls

      20
    • TAB Functions

      20
• Appendix A – API 2500 Controls

  22