Whirlpool 220038-L 010 マニュアル

目次

• front cover

  1
• before you start

  2
• tools needed for installation

  2
• parts provided for installation

  2
• electrical requirements

  2
• now start

  3
  • 1 - remove racks and other parts from inside oven

    3
  • 2 - place cardboard corners on floor behind range

    3
  • 3 - lay range on its back on corners

    3
  • 4 - remove and save the four shipping bolts from skid

    3
  • 5 - install four shipping bolts as leveling legs

    3
  • 6 - stand up range on cardboard sheet

    3
  • 7 - remove the shipping materials from range top

    3
  • 8 - adjust the leveling legs

    3
  • 9 - remove terminal block cover on back of range

    3
  • 10 - insert strain relief into hole below terminal block

    3
  • 11 - connect grounding wire of power supply to range

    3
  • 12 - connect the other wires to range

    3
  • 13 - tighten the strain relief screws

    3
  • 14 - mark template for anti-tip brackets

    3
  • 15 - drill holes for anti-tip brackets

    4
  • 16 - place brackets on floor and secure with screws

    4
  • 17 - plug in power supply cord

    4
  • 18 - move range to final position and check anti-tip brackets

    4
  • 19 - place level on rack in oven and adjust legs if needed

    4
  • 20 - push in and turn each control knob to HI

    4
  • 21 - check the operation of the right oven

    4
  • 22 - check the operation of the left oven

    4
• if the range does not operate

  5
• for cleaning and maintenance

  5
• if you need assistance

  5
• if you need service

  5