Manualsbrain.com

English
Deutsch
Español
Français
Italiano
Português
Русский
조선말, 한국어
中文

マニュアル
ブランド
Xerox
DocuColor 12 Printer with Splash G620

Xerox DocuColor 12 Printer with Splash G620 マニュアル

Xerox

ユーザーガイド (English)

ユーザーガイド

目次

Declaration of Conformity
8
Table of Contents
10
- CHAPTER 1: Quick Start Instructions
  10
- CHAPTER 2: Installing Server Software
  10
- CHAPTER 3: Installing Client Software
  10
- CHAPTER 4: Splash Server Printing
  11
- CHAPTER 5: Splash Client Printing
  11
- CHAPTER 6: Splash Print Options
  11
- CHAPTER 7: Splash Server Interface
  12
- CHAPTER 8: The Web Queue Manager
  13
- CHAPTER 9: Calibration
  14
- CHAPTER 10: Splash Acquire Plug-in
  14
- CHAPTER 11: Application Notes
  14
- CHAPTER 12: FAQs, Troubleshooting, and Technical Support
  15
  - Introduction
    16
Product Features
16
System Requirements
19
- The server software can be installed on any Apple Power Macintosh board that meets the following ...
  19
  - Note!
    19
- The server can install with only 50 MB available, but it needs at least 1GB available to functio...
  19
  - Important!
    20
- Applications running on the Splash server may respond slowly while the Splash server is processin...
  20
  - The Splash Windows client software requires the following:
    20
  - Registration Card
    20
Compatible Applications
20
- The Splash server prints PostScript-based files. The following Macintosh and Windows applications...
  20
Documentation
21
- This manual explains how to assemble and connect the Splash server hardware, install client softw...
  21
- Chapter 1
  22
- Quick Start Instructions
  22
Interdependencies and Technical Assumptions
22
Turnkey Server versus Board Kit
22
The Splash Key
22
- Install the Splash Key as follows:
  22
- Note!
  22
- Do not lose the Splash Key if you remove it from the ADB /USB port on the Splash server. The Spla...
  22
Starting the Splash Server
23
- To start the Splash server for the first time:
  23
- Note!
  23
- The Splash server software is installed on the Splash server. It is not necessary to insert the C...
  23
  - 5. When you have entered the software registration information, click OK.
    23
System Performance Considerations
24
- Disk Size
  24
  - The Splash server includes an internal hard disk drive with at least 800 MB of free storage space...
    24
- Conserving Disk Space
  25
  - Before adding more disk storage to the Splash server, make sure that existing space is used most ...
    25
- Note!
  26
- Back up the contents of the Splash server hard disk to safeguard against losing information store...
  26
  - Memory Size
    26
    - Table 2-1: Minimum Memory Configurations per Application
      26
  - 1.5
    26
  - 3.4
    26
  - 1.2
    26
  - 12.5
    26
    - Important!
      26
- The Virtual Memory option for your computer must remain off in the Memory control panel before yo...
  26
  - Chapter 2
    28
  - Installing Server Software
    28
Before You Begin
28
- Easy Installation and Custom Installation
  28
- System Requirements
  28
  - .Splash Technology, Inc., recommends installing the software from the startup disk of the Splash ...
    28
- Note!
  28
- The Splash Installer places an alias for the Splash server application in the Startup Items folde...
  28
Easy Installation
28
- 1. Insert the Splash CD in the CD-ROM drive on your computer. Open the Splash Install folder. Dou...
  28
- 2. Click Continue. The Server Easy Install dialog box appears.
  29
  - Warning!
    29
- 3. Click the Install button, then follow the instructions on the screen.
  29
- 4. When you are prompted to restart your Macintosh, click Restart.
  29
Custom Installation
29
- 1. Insert the Splash CD in the CD-ROM drive on your computer. Double-click the Splash Installer i...
  29
- 2. Click Continue in the Splash Installer Welcome screen. The Easy Install dialog box appears.
  29
- 3. Choose Custom Install in the dialog box. A list of files appears.
  29
- 4. Select the checkboxes for the files to be installed.
  29
  - Warning!
    29
- 5. Click Install, then follow the instructions on the screen.
  29
- 6. When prompted to restart your Macintosh, click Restart.
  29
Configuring the Splash Server for Client File Sharing
29
- Note!
  30
- You must provide networking hardware and software for all client workstations that will print to ...
  30
- The NetWare Direct window appears also when Enterprise Networking is chosen. For information abou...
  32
- This option is useful for UNIX environments where all users share the same user name, such as “ro...
  32
Configuring for Novell NetWare Direct Printing
35
- Configuring NetWare Direct on the Splash Server
  36
  - Configure NetWare Direct as follows:
    36
- Note!
  36
- The NetWare Direct setup window does not need to be open for NetWare Direct to run.
  36
  - Important!
    37
- If NetWare Direct is not configured and running, jobs sent to the designated Splash print queue o...
  37
  - NetWare Direct Notes
    37
    - Novell File Server Does Not Appear During Setup
      37
    - If a list of Novell file servers does not appear during NetWare Direct setup when you click the B...
      37
Configuring NetWare Directory Service (NDS)
37
- Configuring an NDS Print Queue
  38
  - To create an NDS print queue:
    38
- Configuring NetWare NDS Direct at the Splash Server
  38
  - To configure NetWare NDS Direct:
    38
- Chapter 3
  40
- Installing Client Software
  40
Macintosh Client System Requirements
40
- Important!
  40
- The Splash server is incompatible with client software from other versions of Splash equipment. B...
  40
Installing Macintosh Client Software
40
- Install the Splash client software on each network client that will print to the Splash server as...
  40
Installing Windows Client Software
41
- Windows Client System Requirements
  41
- Installing Windows Custom AdobePS Printer Driver
  42
- Be sure to keep reading!
  43
- Be sure to keep reading!
  43
- Be sure to keep reading!
  43
- Be sure to keep reading!
  43
- The CD-ROM drive dialog opens.
  44
Printer Driver Support
53
- Table 2-2: Supported Drivers
  53
- Macintosh
  53
- Windows 95/98
  53
- Windows 2000/NT
  53
- UNIX
  53
Engaging the Macintosh and the Splash Server
54
- The following Splash print options are not available when printing to the Splash server with the ...
  54
- Engaging From Windows 95/98
  54
- Engaging From Windows 2000/NT
  55
  - The instructions in this section apply to Windows 2000/NT Server and Windows NT Workstation syste...
    55
    - Preparing Windows 2000/NT to Print Over an AppleTalk Network
      55
Printing to TCP/IP and Novell NetWare Clients
55
- Chapter 4
  58
- Splash Server Printing
  58
Setting and Using Splash Printing Options
58
- Default Print Options
  58
- Drop-Printing Files
  58
  - There are three ways to drop-print files to the Splash server:
    58
    - Important!
      59
- If you save a spool file when you drop-print a TIFF or EPS file that is not located on the server...
  59
- The Page Setup and Print dialog boxes in your applications may appear somewhat different from tho...
  60
Selecting AdobePS or LaserWriter 8 Print Options
60
- For instruction on printing a file to the Xerox DocuColor 12 Copier/Printer using the Adobe PS or...
  60
Preparing Print Jobs
60
- The Splash printer driver converts commands from your application into PostScript code. The Splas...
  60
- Chapter 5
  62
- Splash Client Printing
  62
Setting and Using Splash Printing Options
62
- Drop-Printing Files
  62
  - For instructions on drop-printing files, see “Drop-Printing Files” on page43:
    62
- Selecting Printing Options
  62
- Choosing Adobe PostScript or LaserWriter 8 Printer Driver
  62
- Note!
  63
- To use the Direct TCP/IP Printing feature of Macintosh OS 9.0, use the LaserWriter 8 printer driv...
  63
Selecting Print Options on a Macintosh
64
- Select Splash print options using the Adobe PS or LaserWriter 8.6.5 driver as follows:
  64
- Be sure to keep reading!
  64
- Be sure to keep reading!
  64
Setting Print Options With the Custom Adobe Printer Driver
64
- Set Splash print options in the Windows 95/98 Printers Setup dialog box as follows:
  64
Setting Print Options with the Windows95/98 Printer Driver
65
- To set Splash print options in the Printers Setup dialog box:
  65
- Note!
  66
- This document describes setting client printing options specific to the Splash server. These opti...
  66
Setting Paper Options in Windows Applications
66
- 1. Click the Device Options tab. The Device Options dialog appears:
  66
- 2. When all options are selected, click OK.
  66
Printing to the Splash Server from Windows Applications
66
- 1. From the File menu of your application, choose Print. The Print menu opens.
  66
- 2. Enter the number of copies to print.
  66
- 3. Select All to print all pages of your document, or enter a range of pages to print and select ...
  66
- 4. Click Properties. The Printer Properties dialog opens.
  66
- 5. In the Properties dialog box, click the Advanced tab. The Splash Document Properties appear.
  67
- Note!
  67
- This manual describes how to select options that are specific to the Splash server. Windows 2000 ...
  67
Preparing Print Jobs
67
- Chapter 6
  68
- Splash Print Options
  68
Setting Splash Color Options
68
- Color Model
  68
- Printer Mode
  68
- RGB Monitor Color Correction
  68
  - The user controls for RGB color correction are as follows:
    68
    - Enable RGB Color Correction
      69
- Note!
  69
- The default RGB Color Correction setting is Enabled.
  69
  - Rendering Style
    69
  - Select a Rendering Style that describes how the document was created:
    69
- .
  69
  - Note!
    69
- The default Rendering Style is Photographic.
  69
- This feature supports only 100% (non-tinted) spot colors. For best results, do not mix regular pr...
  71
- If a job is selected to RIP and Tune while other jobs are printing, the first page of the job wil...
  73
  - Mirror Image
    73
  - Color Invert Image
    74
Paper Handling Options
74
- Tray Selection
  74
- Tray 5 Options
  74
  - To print from Tray 5 on the Xerox DocuColor 12 Copier/Printer from a Macintosh, select Tray 5 und...
    74
    - Tray 5 Restrictions
      74
- Use MailBox Bin
  74
- Rotate Pages
  75
- Stapling
  75
  - 1. None
    75
  - 2. One corner, portrait
    75
  - 3. One corner, landscape
    75
  - 4. Dual portrait
    75
  - 5. Dual landscape
    75
- Note!
  75
- Jobs for which “Staple” is selected will automatically be collated. All stapled jobs will be prin...
  75
- Stapled jobs should normally be sent in forward order. Because some applications or application e...
  75
- Selecting the Collate option with the Printer Driver Cover Page option prints multiple copies of ...
  76
  - Printing Reverse Page Order
    76
    - Important!
      76
  - Be sure to disable the “collate” option in the applications before printing to the Splash server....
    76
    - Duplex Printing
      76
      - The duplex printing options are:
        76
        Automatic Duplex Printing
        76
        Manual Duplex Printing
        77
    - Note!
      77
- For long documents, avoid the automatic duplex printing process by performing the following steps:
  77
Providing User Information
79
- Document Owner and Password
  79
- Document Comment
  80
- Account Number
  80
Setting Splash Extras Options
80
- Job Handling
  81
  - The Splash server provides three options for handling the PostScript spool file created during pr...
    81
  - Saved spool files remain in the Hold queue until deleted. To delete a spool file:
    81
- Color Separation
  81
  - The Splash Separation print option prints a composite page from applications that support separat...
    81
- Note!
  81
- Splash Separation does not accurately represent traps or overprints composed of a PANTONE, Toyo, ...
  81
  - Note!
    81
- Due to limitations in PageMaker and Quark XPress, RGB graphics are converted to CMYK and therefor...
  81
  - Separation Notes
    82
  - Single Page Separation
    82
  - Print Control Strip
    82
  - Note!
    83
- The control strip image will overwrite the job image if it occupies the same part of the page in ...
  83
  - Print Progressives
    83
  - Note!
    83
- Do not choose the Cover Page option in your application’s print dialog box when printing a progre...
  83
  - Note!
    83
- For best results when creating press proofs using progressives, select one of the Splash one-dime...
  83
  - Auto Grayscale Detection
    83
  - Note!
    83
- For fastest printing of an entirely black and white document, set the Color Model to Grayscale fo...
  83
  - Save as TIFF
    83
    - Important!
      84
- TIFFs must be saved in landscape orientation.
  84
  - Note!
    84
- Save As TIFF can be enabled or disabled in the Server Job Edit window and in the Splash Web Queue...
  84
Switching Between Printer and Copier Modes
84
- Interrupt a print job to make copies as follows:
  84
- Note!
  84
- If the Interrupt light is on and the message Ready to make copies is displayed, press the Interru...
  84
  - Chapter 7
    86
  - Splash Server Interface
    86
The Splash Server’s Main Window
86
- The Full Screen Main Window Features
  86
  - When the Splash server application starts, the Splash main window appears. The full screen main w...
    86
- The Reduced Screen Main Window Features
  88
  - The Splash server’s reduced screen main window displays print queue management and server adminis...
    88
- Main Window Functions
  89
  - Print Job Queues
    89
  - Print job queues show either Active, Hold, or Error status for all jobs spooled at the server. Re...
    89
- Note!
  89
- An S next to a job in a queue indicates that it has been sent to the Splash server, but has not b...
  89
  - Pull-down menu options
    89
    - Column Headings
      89
    - The list of selectable column headings in the reduced window are as follows:
      90
  - Status
    90
  - Document
    90
  - Document
    90
  - Document
    90
  - Completion Time
    90
  - Owner
    90
  - Owner
    90
  - Owner
    90
  - Error Message
    90
    - The list of selectable column headings in the full screen window are as follows:
      90
  - Status
    90
  - i (Get Information)
    90
  - Document
    90
  - Document
    90
  - Document
    90
  - Owner
    90
  - Owner
    90
  - Owner
    90
  - Error Message
    90
  - Size
    90
  - Pages
    90
  - Error Message
    90
  - Copies
    90
  - Spool Time
    90
  - Pages
    90
  - Completion Time
    90
  - Spool Time
    90
    - Selecting Jobs
      90
    - Moving Jobs
      90
    - Viewing and Editing Print Options
      90
    - Deleting Jobs
      91
      - Warning!
        91
    - Job Preview
      91
  - Note!
    92
- Preview of cover page or banner page will not show in thumbnails.
  92
  - Starting and Stopping Processing
    92
    - To select a print job in one of the queues, click it. To select multiple jobs:
      92
      - 1. Hold down Shift and click any two jobs to select the two jobs and all jobs in between (extend-...
        92
      - 2. Hold down Command as you click jobs to select only the jobs you click.
        92
  - Toolbar
    93
    - The Toolbar provides quick access to the following Splash utilities:
      93
Splash Server Functions
93
- Server Preferences
  93
  - The following panes are included:
    93
- Job Editor
  93
- Job Defaults Editor
  93
  - Setting Default Print Options
    93
- Job Error Checking (Preflight)
  94
  - The Splash server can check a job for errors before it prints. The Splash server’s Preflight feat...
    94
    - Splash Preflight Notes
      94
- Job Log Controls
  95
  - Starting a Log File
    95
  - To start a log file:
    95
  - The Splash server applies special formatting to the information in the Splash.log file and prints...
    95
- Color Profile Selection
  96
  - Old Style CMYK Profiles
    96
  - 4D CMYK Profiles
    97
- ColorTuner
  97
- Starting and Stopping the Server Application
  97
  - The Splash server applies the default print options in the following situations:
    98
- Note!
  98
- The Splash server can be configured to allow selecting print options for EPS and TIFF files that ...
  98
  - Note!
    98
- Job defaults set at the Splash server do not affect defaults at the printer driver. When a client...
  98
  - Job Defaults for PostScript Printing
    98
  - Job defaults are applied to jobs from the following sources:
    98
    - Job Defaults for Graphics Files
      98
  - Splash server defaults are applied to graphics files. The defaults are those used for PostScript ...
    98
  - RIP-While-Receive
    99
    - The Splash server has an automatic RIP While Receive function. Automatic RIP While Receive reduce...
      99
  - RIP Across Jobs
    99
  - Instant Reprint
    99
  - Note!
    99
- No explicit user control for this feature.
  99
  - Raster File Management
    99
    - 1. Page Range
      99
    - 2. Duplex
      99
    - 3. Force Paper Size
      99
    - 4. Scale to Paper Size
      100
    - 5. Rotate
      100
    - 6. Staple
      100
    - 7. Two-up imposition
      100
    - 1. Tray Selection
      100
    - 2. Paper Type Selection
      100
    - 1. Dynamic Edge Smoothing
      100
    - 2. Black Overprints
      100
    - 3. Alternate Black
      100
    - 4. Auto Trapping
      100
    - 5. ColorTuner
      100
    - 6. Mirror Image
      100
    - 7. Invert Image
      100
    - 1. RIP and Hold
      100
    - 2. Separations
      100
    - 3. Single page separations
      100
    - 4. Progressives
      100
    - 5. Auto grayscale detection
      100
    - 6. Print control strip
      100
    - 7. Save As Tiff
      100
    - 8. Save As Tiff DPI
      100
    - Changing server preferences will not cause jobs to be re-RIPped. When some options are changed, h...
      100
      - PostScript Files
        101
      - Graphics Files
        101
    - The Splash server supports direct processing of EPS and TIFF file types.
      101
  - Look Ahead Routing
    101
  - Setting Splash Server Preferences
    101
    - 1. Choose Server.
      101
    - 2. Choose Login.
      101
    - 3. Enter the Administrator Password.
      101
    - 4. Click OK.
      101
      - Important!
        102
- Do not modify server preferences when printing is in progress at the server. Doing so could cause...
  102
  - Note!
    102
- If you connect the Splash server to a different copier/printer, you must restart the Splash serve...
  102
  - Naming the Server
    102
  - Job Processing Preferences
    102
- (These options are being verified against the new interface. No new information in Functions Spec...
  102
  - Splash Server Preferences provides the following options for processing print jobs:
    102
  - Note!
    102
- When this server preference is selected, each print job received by the server must be dragged fr...
  102
  - Setting Page Preferences
    103
  - Setting Network Preferences
    104
  - Setting Color Preferences
    105
    - Toner Limitation
      105
    - Splash Server Preferences–Color provides three options for applying the Toner Limitation feature.
      105
      - Composite Spot Colors
        105
  - Note!
    105
- This feature supports only 100% (non-tinted) spot colors. For best results, do not mix regular pr...
  105
  - GCR Preserving Processing
    105
  - Progressives
    106
  - Setting Server Screening Preferences
    106
    - Splash Server Preferences–Screens provides several options for screened output:
      106
  - Setting Server Style Preferences
    106
  - ColorCal
    107
    - ColorCal is Splash Technology’s automated color calibration system. Frequent and regular calibrat...
      107
  - Duplex Alignment
    107
    - Setting Duplex Alignment
      107
  - Note!
    108
- The image on this page is either letter or A4 size, even if the paper size is larger. Use these l...
  108
  - 4. Enter the Offset values. The minimum is -999; the maximum is 999. An offset that would cause a...
    108
  - 5. Click Verify Job to print a verification test pattern that shows the effects of the current of...
    108
  - 6. If you are satisfied with the results, click Update to close the dialog box. If you are not sa...
    108
  - Note!
    108
- The duplex alignment feature works with both auto-duplexing from trays and manual duplexing from ...
  108
- When offsets are entered, the second side (even pages) is shifted on the output for all duplex pr...
  108
- Although Duplex Alignment works for all page sizes, negative offsets in the feed direction on A3 ...
  108
  - Adding Fonts to the Splash Server
    108
    - Enabling Font Downloading at the Splash Server
      108
    - Before you can download fonts to the Splash server you must enable font downloading in the Splash...
      108
      - 1. In the Splash server application choose Preferences from the Server menu, then click Network a...
        108
      - 2. Select the Font Downloading check box.
        108
  - Note!
    109
- When Font Downloading is enabled, a new option appears in the AppleTalk Chooser. The new Chooser ...
  109
  - Downloading Fonts to the Splash Server
    109
  - To download fonts with the Adobe font downloader:
    109
Splash Color Correction
109
- Note the following for best results with Splash Color Correction:
  110
  - Important!
    110
- Most business application documents contain only RGB data. CMYK color correction normally should ...
  110
- Disabling EFICOLOR correction in the Quark XPress application is not sufficient. Quark XPress con...
  111
Splash Server Notes
111
- Increasing the Print Queue Capacity
  111
  - To allocate additional memory to the Splash server application:
    111
- Disable Type Reunion Extension
  111
- Running Other Applications on the Splash Server
  111
- Print Job Name Notes
  112
- Note!
  112
- Adobe Acrobat PDF files cannot be drop-printed to the Splash server if they were password protect...
  112
  - Job Processing Notes
    112
    - Job Log Notes
      112
  - Customizing the Splash Color Control Strip
    113
  - Note!
    113
- Editing the control strip file requires knowledge of the PostScript language.
  113
Web Queue Manager Functions
116
- To connect to the Splash server and remotely view and control the Server queues, connect the Spla...
  116
Preparing the Web Queue Manager
116
- Configuring the Web Queue Manager
  116
  - Configuring the Web Queue Manager involves the following two steps:
    116
    - 1. Configuring the MacOS TCP/IP control panel
      116
    - 2. Enabling Web access in the Splash Server application preferences
      116
- Configuring the TCP/IP Control Panel
  117
- Note!
  117
- If your Splash server has TCP/IP Direct printing enabled, the MacOS TCP/IP control panel is alrea...
  117
  - To configure an Internet address for the Splash Server:
    117
Enabling Web Access at the Splash Server
117
- 1. Start the Splash server application, then choose Preferences from the Server menu. The Splash ...
  117
- 2. Click Network at the top of the Preferences dialog box.
  117
- 3. Under Services, select the Enable Web Access check box.
  117
- 4. Click OK.
  117
- 5. Provide the Internet address for the Web Queue Manager to clients so they can connect to the S...
  118
- 6. The Web Sharing dialog box appears. Select the hard drive, then open the Splash folder. Select...
  118
- 7. Go to the Edit Menu and select Preferences.
  118
- 8. When the dialog box appears, click the Options tab and confirm that Allow Aliases to open… is ...
  118
Controlling Remote Queue Management Privileges
118
- To set the Remote Queue Management option:
  118
Using the Web Queue Manager
118
- 1. Open the Web browser application (Netscape Navigator or Microsoft Internet Explorer).
  118
- 2. In the Web browser, enter the Web address for the Splash server. Contact your Splash administr...
  118
- 3. Click Server Preferences to view the default server preferences set for the Splash server. Use...
  119
- 4. To view information for a print job, select the check box to the left of the job in the list, ...
  119
- 5. If the job has already been RIPped, click the Preview button in the Job Information screen to ...
  119
- Managing Print Jobs in the Queue
  119
- Note!
  120
- If you did not provide a user name and password when you originally sent the job, enter the “Owne...
  120
  - Editing Print Jobs in the Queue
    120
Web Queue Manager Notes
120
- Job Selection Checkmarks Disappear
  120
- Chapter 9
  122
- Calibration
  122
  - Advantages of using Splash ColorCal are as follows:
    122
Setting ColorCal Options
122
- Setting the Verify Against Profile
  122
  - 1. In the Splash ColorCal application, choose ColorCal Options from the Splash menu. The Default ...
    122
  - 2. Choose a profile in the Verify Against pop-up menu.
    122
- Inverting the Calibration Image (Mirror Image)
  123
Calibrating the Copier/Printer
123
- Note!
  123
- ColorCal allows calibration on heavy weight paper and the Profile Sets feature provides a standar...
  123
- ColorCal calibration does not affect the quality of photocopies. Only files printed with the Spla...
  123
- Always calibrate the printer after a service call.
  123
  - Important!
    123
  - Be sure the copier/printer is running during the entire calibration procedure.
    123
- The paper in Tray 5 must use the SEF orientation.
  125
- Be sure to use the Gray Scale target for this step to produce the most accurate scanning results....
  125
  - 16. Click Scan. ColorCal scans the target and determines current color performance based on the a...
    125
  - Note!
    126
- The vertical axis for each color curve is in units of Status-T less the paper density. The horizo...
  126
  - 17. Click Update Profiles to have ColorCal adjust color output to match the Desired Density level...
    126
  - 18. Click Verify to check calibration results for the printer (see “Verifying Printer Color Accur...
    126
Verifying Printer Color Accuracy
126
Failure to Accurately Calibrate
127
AutoGray
127
- After calibrating using ColorCal, calibrate AutoGray as follows:
  127
Editing Custom Color Profiles (Expert Mode)
128
- Note!
  129
- For v4.0-style profiles, the color curve editor plots density (from 0.0 to 2.0) against input per...
  129
  - Editing Curve Gains
    129
    - 1. Select a color profile to edit from the Color profile popup menu.
      129
  - Note!
    129
- Factory installed profiles cannot be edited. ColorCal automatically prompts to save with a new na...
  129
- A single level of Undo is supported which removes the last change applied. The Revert button rest...
  130
  - Control Point Editing
    130
    - 1. Select a color profile to edit from the color profile popup menu.
      130
  - Note!
    130
- Factory installed profiles cannot be edited. ColorCal automatically prompts to save with a new na...
  130
- The color curves created with the Expert Edit controls are similar to those used in Adobe Photosh...
  130
- No undo is supported in the edit table dialog.
  131
Creating Color Profile Sets
131
- 1. Choose Edit Color Profile Sets from the ColorCal menu.
  131
- 2. Click Add.
  131
- 3. Enter a name for the profile set.
  132
- 1. Choose Color Profile Sets from the Splash server’s Server menu.
  132
- 2. For each tray, choose the profile set to use.
  132
- 3. Click OK.
  132
Profile Sets
132
Managing the Profiles Folders
132
- Chapter 10
  134
- Splash Acquire Plug-in
  134
About the Splash Acquire Plug-In
134
- System Requirements
  134
- Note!
  134
- Splash servers provide enough memory to run the Splash server application only. To use Adobe Phot...
  134
  - Installation
    134
- Awaiting procedure description and graphics for hardware installation.
  134
- For an exact match, apply the Unsharp Mask filter in Adobe Photoshop after you scan the image and...
  136
CopyCal
140
- CopyCal is a standalone application that creates profiles that allow the Splash server to emulate...
  140
- CopyCal Profiles
  140
- CopyCal Calibration
  140
Windows General Notes
141
- Windows Driver Notes
  141
- Windows Network Notes
  141
  - Novell NetWare Notes
    141
- Windows Application Notes
  141
Windows 95/98 Notes
143
- Canceling a Print Job
  143
- Clear PostScript Error Option Before You Print
  143
- Note!
  143
- The default setting for this option is on. Uncheck this option in the Printer Properties window.
  143
Windows 2000/NT Notes
145
- Windows 2000/NT Network Notes
  145
  - “Print PostScript error information” Check box
    145
- Note!
  145
- The default setting for this option is On. Deactivate this option in the Printer Properties window.
  145
  - Windows 2000/NT Application Notes
    145
    - General
      145
    - Adobe PageMaker Notes
      145
    - Microsoft PowerPoint Notes
      145
    - Quark XPress Notes
      145
    - Force Tray Option
      145
    - “Print PostScript error information” Check box
      145
  - Note!
    146
- The default setting for this option is On. Uncheck this option in the Printer Properties window.
  146
  - Chapter 12
    148
FAQs, Troubleshooting, and Technical Support
148
- FAQs
  148
- Troubleshooting
  148
- Technical Support
  152
  - Glossary
    154
    - 3M™ Disposable Grounding Wrist Strap:
      154
    - Automatic Grayscale Detection:
      154
    - Color Correction:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      154
    - Color:
      155
    - Color:
      155
    - ColorCal:
      155
    - ColorSync:
      155
    - ColorTune:
      155
    - CopyCal:
      155
    - DIMMs:
      155
    - Documentation:
      155
    - Drivers:
      155
    - Drivers:
      155
    - Drivers:
      155
    - Drivers:
      155
    - Drivers:
      155
    - Drop-print:
      155
    - GCR Preserving Profiles:
      155
    - Grayscale:
      155
    - Key:
      155
    - Macintosh:
      155
    - Novell NetWare:
      155
    - Online Documentation:
      155
    - PDF:
      156
    - Port Kit:
      156
    - Power Macintosh G3/G4:
      156
    - Preflight:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      156
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Printing:
      157
    - Two-up Imposition prints 2 Letter or A4 pages on a single Tabloid or A3 sheet respectively. Two-u...
      157
    - Printing:
      157
    - Progressives:
      157
    - Queue:
      157
    - RIP Across Jobs:
      158
    - RIP:
      158
    - RIP-While-Print:
      158
    - RIP-While-Receive:
      158
    - Scanning:
      158
    - Splash Acquire plug-in:
      158
    - Splash ICC ColorSync Profiles:
      158
    - Splash Key:
      158
    - Splash Memory DIMMs:
      158
    - Splash Online Documentation:
      158
    - Splash Server User Interface:
      158
    - Splash Web Queue Manager:
      158
    - TCP/IP:
      158
    - USB port:
      158
      - Web Queue Manager:
        158
    - Xerox Asset Tag:
      158
    - Xerox DocuColor 12 Copier/Printer:
      158
  - Index
    160
    - A
      160
    - B
      160
    - C
      160
    - D
      162
    - E
      162
    - F
      163
    - G
      163
    - H
      163
    - I
      163
    - J
      164
    - K
      164
    - L
      164
    - M
      164
    - N
      164
    - O
      165
    - P
      165
    - Q
      167
    - R
      167
    - S
      167
    - T
      168
    - U
      169
    - V
      169
    - W
      169
    - Z
      169

サイズ：

2.64MB
ページ数：

169
Language:

English

マニュアルを開く

Manualsbrain.com

Manualsbrain.com お問い合わせ
DMCA
お問い合わせ
Privacy Policy

Manualsbrain © copyright 2024