Philips MP60/70/80/90 사용자 설명서
Changing Loops Display Size
29 Respiratory Loops
291
Changing Loops Display Size
To change the loops display size, in the
Loops
window, select the pop-up key
Select Size
then
select
•
Size x 0.5
to display loops at half the usual size
•
Size x 1
to display loops at the usual size
•
Size x 2
to display loops at twice the usual size
This does not affect the size of loops printed in reports.
Using the Loops Cursor
To view the coordinates for any point on a stored loop,
1
Select the pop-up key
Select Loop
.
2
Select the required loop from the list of available loops.
3
Use the arrow pop-up keys to move the cursor around the loop. The values for both loop axes are
shown for every point on the loop.
shown for every point on the loop.
Select the X at the top of the loop list to exit the cursor.
Changing Loops Type
To change the loop type, in the
Loops
window, select the
Loop Type
pop-up key (only available if
the source device delivers three waves), then select
•
Press/Volume
to display Pressure/Volume loops
•
Flow/Volume
to display Volume/Flow loops
•
Press/Flow
to display Pressure/Flow loops.
or, if the source device only delivers two waves,
1
In the
Loops
window, select the
Setup Device
pop-up key to enter the
Setup <VueLink Device>
menu.
2
Select
Wave 1
and select pressure, flow, or volume waves as required. Repeat for
Wave 2
.
Setting Up Source Device
The source device for the loops is indicated in the
Loops
window title.
♦
Select the
Setup Device
pop-up key to view the settings of the current source device.
If the source device is changed, all reference loops from a previous device are cleared from the reference
list when the first loop from the new source device is captured. Reconnecting the previous device recalls
its reference list.
list when the first loop from the new source device is captured. Reconnecting the previous device recalls
its reference list.