Philips MP60/70/80/90 사용자 설명서

Quick Admitting a Patient

–

: Enter the patient’s first name, for example 

–

: Enter the patient’s medical record number (MRN), for example 

–

: Choose the patient category, either Adult, Pediatric, or Neonatal.

–

: Choose 

 or 

 (You must use “Yes” if your patient has a pacemaker).

–

: Enter the patient’s height.

–

: Enter the patient’s weight.

–

: The monitor calculates the body surface area automatically.

–

: Enter the patient’s date of birth. Enter this in the form dd/mm/yyyy.

–

: The monitor calculates the patient age automatically.

–

: Choose 

 or 

.

–

: Enter any extra information about the patient or treatment.

Select

The patient status changes to admitted.

The patient category setting determines the algorithm the monitor uses to process and calculate some 
measurements, the safety limits that apply for some measurements, and the alarm limit ranges.

The paced setting determines whether the monitor shows pacemaker pulses or not. When 

 is 

set to 

, pace pulses are filtered and therefore do not show in the ECG wave.

 and 

 status will always contain a value, regardless of whether the 

patient is fully admitted or not. If you do not specify settings for these fields, the monitor uses the 
default settings from the current profile, which might not be correct for your patient.

Patient category  Changing the patient category may change the arrhythmia and NBP alarm limits. 
Always check alarm limits to make sure that they are appropriate for your patient.

Paced status For paced patients, you must set 

 to 

. If it is incorrectly set to 

, the monitor 

could mistake a pace pulse for a QRS and fail to alarm during asystole.

You can admit a patient at either the bedside or the Information Center. When you admit a patient, 
the patient’s name appears on the bedside monitor and the Information Center. 

If you do not fill in all patient information required by the Information Center, the Information 
Center may reject the admission. Complete all the required fields and try again to admit the patient. 

Use Quick Admit only if you do not have the time or information to fully admit a patient. Complete 
the rest of the patient demographic details later. If you do not, the patient name will not be written on 
reports and on information stored in the database or sent to an Information Center. 

Select the 

 SmartKey.

Enter the required data (MRN or Last Name depending on configuration) with the keyboard or a 
barcode scanner.