Yard Machines 152 사용자 설명서

 

 3

 

• If the snow thrower should start to vibrate

abnormally, stop the engine and check immediately
for the cause. Vibration is generally a warning of
trouble.

• Stop engine whenever you leave the operating

position, before unclogging the collector/impeller
housing or discharge guide, and making any repairs,
adjustments, or inspections. Never place your hand
in the discharge or collector openings. Use a stick or
wooden broom handle to unclog the discharge
opening.

• Take all possible precautions when leaving the unit

unattended. Disengage the collector/impeller, shift
into neutral, stop the engine, and remove the key.

• When cleaning, repairing, or inspecting, make certain

collector/impeller and all moving parts have stopped.
Disconnect spark plug wire and keep away from plug
to prevent accidental starting.

• Do not run engine indoors, except when starting

engine and transporting snow thrower in or out of
building. Open doors. Exhaust fumes are dangerous.

• Do not clear snow across the face of slopes.

Exercise extreme caution when changing direction
on slopes. Do not attempt to clear steep slopes.

• Never operate snow thrower without guards, plates,

or other safety protection devices in place.

• Never operate snow thrower near glass enclosure,

automobiles, window wells, drop off, etc., without
proper adjustments of snow thrower discharge angle.
Keep children and pets away.

• Do not overload machine capacity by attempting to

clear snow at too fast a rate.

• Never operate the machine at high transport speeds

on slippery surfaces. Look behind and use care
when backing.

• Never direct discharge at bystanders or allow anyone

in front of unit.

• Disengage power to collector/impeller when

transporting or not in use.

• Use only attachments and accessories approved by

the manufacturer of snow thrower (such as wheel
weights, counter weights, cabs, etc.).

• Never operate the snow thrower without good

visibility or light. Always be sure of your footing and
keep a firm hold on the handles. Walk, never run.

• Muffler and engine become hot and can cause a

burn. Do not touch.

 

• Check shear bolts, engine mounting bolts, etc., at

frequent intervals for proper tightness to be sure
equipment is in safe working condition.

• Never store the machine with fuel in the fuel tank

inside a building where ignition sources are present,
such as hot water and space heaters, clothes dryers,
and the like. Allow engine to cool before storing in
any enclosure.

• Always refer to operator's manual instructions for

important details if snow thrower is to be stored for
an extended period.

• Run machine a few minutes after throwing snow to

prevent freeze up of collector/impeller.

• Check clutch controls periodically to verify they

engage and disengage properly and readjust if
necessary. Refer to operator's manual for adjustment
instructions.

 

Figure 1