Daewoo DVQ 14H1FC 지침 매뉴얼

Chapter 3 : Operating Your TV

C H A P T E R

Once you have connected your TV/VCR to an antenna or cable system, plugged the TV in,
and put batteries in the remote, you are ready to use the TV. The first thing you should do is
program your TV/VCR so it memorizes all of available channels.

To turn your TV/VCR on, press the POWER button on the remote
control. You can also use the POWER button on the front panel.
Make sure your TV is plugged in before you try to turn it on.

Your TV/VCR's memory determines the channels that are  available using the x

xCHy

y but-

tons. If a channel is not in memory, you can tune to it with the number buttons, but not with
the x

xCHy

y buttons. Follow these steps to program your TV/VCR's memory:

With the TV on, press the MENU button until “Set-Up”menu will be displayed.

Use the x

xCHy

y buttons to select “Reception”, then use the VOLB

B button to select ‘Air’

or ‘Cable’. If you connected an antenna to your TV/VCR, select ‘Air’; If you connected a
cable system, select ‘Cable’.

Use the x

xCHy

y buttons to select “Memorize Channels”, then use the VOLB

B button to

enter the “Memorize Channels” process. 

Press the MENU button to return to Set-Up menu.

Press the MENU button to return to normal TV viewing.

Your TV/VCR's channel memory will not be affected by a power outage. You will not need to
re-program the memory unless you change the type of cable or antenna connected to your
TV/VCR.