Pelco c649m 사용자 설명서
30
Pelco Manual C649M (7/99)
7.0 LOADING/UNLOADING/PROTECTING THE TAPE CASSETTE
You can load video cassette tapes into your VCR as long as it is plugged into a
power source. Loading a cassette automatically turns the VCR on even if its power
switch is turned off. Use only video cassette tapes marked VHS.
power source. Loading a cassette automatically turns the VCR on even if its power
switch is turned off. Use only video cassette tapes marked VHS.
Use only standard grade VHS cassette tapes for reliable video recording. Do not
use Pro, Hi-Fi, and High Grade tapes–they may damage the video heads.
use Pro, Hi-Fi, and High Grade tapes–they may damage the video heads.
Do not use a T-160 or ST-160 tape when recording in 48H – 168H or 0H modes.
7.1 LOADING
1.
To position the cassette properly before inserting it in the cassette slot, hold
the cassette so the long narrow edge with the contents label faces you. The
hinged narrow edge should face the VCR. The clear plastic window showing
the tape should face up.
the cassette so the long narrow edge with the contents label faces you. The
hinged narrow edge should face the VCR. The clear plastic window showing
the tape should face up.
2.
Line up the cassette squarely with the cassette slot and gently push the video
tape in until the VCR pulls it in.
tape in until the VCR pulls it in.
7.2 UNLOADING
1. Press the EJECT button on the front of the VCR.
2. Remove the cassette.
7.3 PREVENTING ACCIDENTAL ERASURE
Video cassettes come with an erasure prevention tab. When it is removed it stops
the tape’s contents from being erased or recorded over. The VCR will automatically
eject a cassette if you try to record over it with the erasure prevention tab removed.
the tape’s contents from being erased or recorded over. The VCR will automatically
eject a cassette if you try to record over it with the erasure prevention tab removed.
ENTER
FF
FF
CLEAR
REW
REW
JOG/ADJUST
SHUTTLE/ENTER
REC
STOP
PLAY
POWER
EJECT
PICTURE
TRACKING
POSITION/
VERTICAL
ADJUST
REC/PLAY
MODE
COUNTER
RESET
COUNTER MEMORY
SKIP/INDEX
PAUSE/
SHUTTLE HOLD
DISPLAY
TIMER REC
VIDEO
SOFT
SHARP
COLOR
B/W
CORRECT
INCORRECT
NOTE: The VCR’s protection cir-
cuit will eject the tape if it is loaded
improperly. If the VCR ejects the
improperly. If the VCR ejects the
tape you are trying to load, remove
it and check that the contents la-
bel is facing you and the clear plas-
it and check that the contents la-
bel is facing you and the clear plas-
tic window showing the tape faces
up. Try again.
up. Try again.
NOTE: The VCR will eject a video
cassette even if it is in STANDBY
cassette even if it is in STANDBY
mode. When you press the EJECT
button, the VCR will automatically
button, the VCR will automatically
turn on, eject the tape, and turn off.
You cannot eject a tape while record-
ing without first pressing the STOP
You cannot eject a tape while record-
ing without first pressing the STOP
button, or while the VCR is locked.
NOTE: We recommend taking
any torn or broken cassette tape
requiring repair only to profession-
als who specialize in such proce-
requiring repair only to profession-
als who specialize in such proce-
dures. The adhesives on many
common types of tape could dam-
common types of tape could dam-
age the head on the VCR.