Pelco C2232M 사용자 설명서

C2232M (2/07)

1

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Installation should be done only by qualified personnel and conform to all local codes.

6. Only use replacement parts recommended by Pelco.

7. This unit is designed for indoor use only, and it must not be installed where exposed to rain or moisture.

The PMCL-VA monitor mount adapter allows a Pelco PMCL-CM or PMCL-CMP ceiling mount to be used with certain Pelco PMCL500 Series flat panel LCD 
monitors. The adapter makes the ceiling mount VESA

®

-compliant. The adapter is required for the following Pelco monitors if they are ceiling mounted:

PMCL537

37-inch flat panel LCD monitor

PMCL542

42-inch flat panel LCD monitor

The following parts are supplied:

1

Adapter plate

4

M6 x 12 machine screws

NOTE: It is recommended that at least two people be present when mounting the monitor. One person (or more) should hold the monitor, while a second 
(or third) person installs the screws to secure the monitor to the adapter plate.

Refer to the appropriate Pelco mount manual for details on installing the PMCL-CM (non-telescoping) ceiling mount, or installing and adjusting the 
PMCP-CMP (telescoping) ceiling mount. Do the following:

1. Attach the mount to the ceiling.

2. Adjust the length of the telescoping pole (PMCL-CMP only).

3. Adjust the lower section of the mount to the desired direction.