Peerless Industries PT630 사용자 설명서

ISSUED: 11-19-07 SHEET #: 202-9245-2 07-28-09

Note: Read entire instruction sheet before you start installation and assembly. 

Parts List.................................................................................................................................................................................3
Installation to Single Wood Stud Wall .....................................................................................................................................4
Installation to Solid Concrete or Cinder Block ........................................................................................................................5
Attaching Mounting Plate to Screen with VESA 75 or 100 Mounting Pattern .........................................................................6
Attaching Adapter Plate to Screen with VESA 200 x 100 or 200 x 200 Mounting Pattern .....................................................7
Installing and Removing Flat Panel Screen............................................................................................................................8

•  stud finder ("edge to edge" stud finder is recommended)
•  phillips screwdriver
•  drill 
•  5/16" (8 mm) bit for concrete and cinder block wall
•  5/32" (4 mm) bit for wood stud wall
•  level

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US

customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact

your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

•  Make sure that the supporting surface will safely support the combined load of the equipment and all attached

hardware and components.

•  Never exceed the Maximum Load Capacity. See page one.
•  If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of

an "edge to edge" stud finder is highly recommended.

•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
•  Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

•  This product was designed to be installed on the following wall construction only;
 

 • Wood Stud

Included

 

• Wood Beam

Included

 

• Solid Concrete  

Included

 

• Cinder Block

Included

 

• Metal Stud

Do not attach except with Peerless Metal Stud Accessory Kit - ACC215;

 

• Brick

Contact Qualified Professional

 

• Other or unsure?  

Contact Qualified Professional