Peerless Industries SP 850 사용자 설명서

ISSUED: 10-12-05  SHEET #: 202-9038-6  05-19-07

FOR VESA 200 MOUNTING PATTERN:
Thread two M4 x 12 mm screws (BB), leaving .25" exposed thread, into top holes on back of screen. Hook screen
onto mounting plate, and attach using two bottom M4 x 12 mm screws as shown in figures 4.3 and 4.4. Tighten all
four screws.

FOR SCREENS WITH VESA MOUNTING PATTERN IN A POCKET:
Thread two retaining spacers (L) onto two M4 x 20 mm screws (CC), leaving .25" exposed thread as shown in figure
4.5. Thread M4 x 20 mm screws with retaining spacers into top holes on back of screen. Hook screen onto mounting
plate, and attach using bottom two M4 x 20 mm screws and retaining spacers as shown in figures 4.3 and 4.4.
Tighten all four screws.

MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)

MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)

Note: Flat panel screen
may appear slightly
different than illustrated.

For screens with a hole
pattern in a pocket,
spacers (L) go between
mounting plate and
screen.

GENERIC
ADAPTER
BRACKET

Note: Refer to PLP model adapter bracket instruction sheet for attachment of adapter bracket to screen.

Thread two M10 x 15 mm screws (K), leaving .25" exposed thread, into top holes on back of screen. Hook screen
onto mounting plate, and attach using two bottom M10 x 15 mm screws as shown in figures 5.7 and 5.8. Tighten
screws using 6 mm allen wrench (not included).

5

For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or
call customer care for a screen specific adapter bracket (PLP models).

GENERIC ADAPTER
BRACKET

MOUNTING PLATE

MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY
FOR CLARITY)