Peerless Industries SF 635 사용자 설명서

ISSUED: 04-20-05  SHEET #: 201-9429-6  02-01-06

Thread M5 socket pin screws (D) to hook bracket (B)
making the screws flush with bracket as shown.

Attach hook bracket (B) to adapter plate (C) using
four M5 x 6 mm screws (E) and #10 washers (F) as
shown.

2

Note: For VESA 75 mm and 100 mm patterns, see
following page.

• If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not

tightly secured, damage may occur to screen or product may fail.

3

Choose hole pattern as shown below. Attach adapter
plate (C) to back of screen using four M4 x 10 mm
screws (L) as shown below.

*Note: If screw (L) gets less than three threads of
engagement, attach adapter plate (C) to back of
screen using four M4 x 20 mm screws (M) and four
spacers (N) as indicated below.

Choose hole pattern as shown below. Attach adapter
plate (C) to back of screen using four M6 x 12 mm
screws (I) as shown below.

*Note: If screw (I) gets less than three threads of
engagement, attach adapter plate (C) to back of
screen using four M6 x 20 mm screws (J). If screw
(J) still gets less than three threads of engagement,
use four M6 x 30 mm screws (K).

*For screens with a hole
pattern in a pocket,
spacers (N) go between
adapter plate (C) and
screen.