Peerless Industries PP730 사용자 설명서

ISSUED: 10-01-07  SHEET #: 095-9272-2   06-15-09

AA wall arm assembly

1

095-P1630

095-4630

A M4 x 12 mm phillips screw

4

504-9013

504-2014

B M4 x 20 mm phillips screw

4

504-9020

504-2013

C retaining spacer

4

590-5005

590-5003

D #14 x 2.5" wood screws

2

520-1202

520-2165

E 5 mm allen wrench

1

560-9640

560-9640

F concrete anchors

2

590-0320

590-0320

G cable ties

2

560-9711

560-2004

H cable tie anchor

1

590-1290

590-1290

I 3/16" allen wrench

1

560-0071

560-0071

M 8-32 x 1/4" flat head screw

1

520-1622

520-2622

•  Installer must verify that the supporting surface will

safely support the combined load of the equipment 

and all attached hardware and components.

•  Tighten wood screws so that wall plate is firmly at-

tached, but do not overtighten. Overtightening can

damage the screws, greatly reducing their holding 

power.

•  Never tighten in excess of 80 in. • lb (9 N.M.).
•  Make sure that mounting screws are anchored into the

center of the stud. The use of an "edge to edge" stud

finder is highly recommended.

•  Hardware provided is for attachment of mount through

standard thickness drywall or plaster into wood studs. 

Installers are responsible to provide hardware for 

other types of mounting situations (not UL approved). 

Using a stud finder, locate and mark the edges of

the wood stud used in mounting this product. Use of 

an edge to edge stud finder is highly recommended.

Use a level to draw a vertical line down the center of 

the stud. Use wall plate as template to mark center 

of holes along the vertical line. Drill two 5/32" (4

mm) dia. holes 2.5" (64 mm) deep. Attach wall arm

assembly (

AA) to wall using two #14 x 2.5” flat head

wood screws (

D).

1

WOOD STUD WALL