Peerless Industries SF680-S 사용자 설명서
8 of 34
ISSUED: 11-09-07 SHEET #: 202-9253-4 08-31-10
Mounting and Removing Flat Panel Screen
Hook adapter brackets (BB) onto wall plate (AA).
Then slowly swing screen in as shown. Turn safety/
security screws, using security allen wrench (EE),
clockwise at least six times to prevent screen from
being removed as shown in detail 1 of fi gure 3.1.
Screen can be adjusted horizontally if desired as
shown in fi gure 3.2.
Then slowly swing screen in as shown. Turn safety/
security screws, using security allen wrench (EE),
clockwise at least six times to prevent screen from
being removed as shown in detail 1 of fi gure 3.1.
Screen can be adjusted horizontally if desired as
shown in fi gure 3.2.
NOTE: To lock the screen down, tighten safety/
security screws to wall plate as shown in detail 1.
security screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety/
security screws, swing screen away from mount,
and lift screen off of mount.
security screws, swing screen away from mount,
and lift screen off of mount.
3
• Always use an assistant or mechanical lifting
equipment to safely lift and position the fl at panel
screen.
screen.
WARNING
AA
BB
DETAIL 1
BB
SAFETY/
SECURITY
SCREWS
AA
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
screws to 40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
fi g. 3.1
fi g. 3.2
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com