Peerless Industries ACC925 사용자 설명서

ISSUED: 11-19-08  SHEET #: 120-9062-3  06-29-12

Visit the Peerless Web Site at www.peerless-av.com

For customer care call 1-800-865-2112.

To attach screen to arm (not included), insert the puck of 
adapter plate into the tilt bracket slot as shown in fi gure 
3.1. Attach brake pad assembly as shown in Detail 3 
so that the brake pad is snug against the adapter plate. 
Adjust roll position of adapter plate to level screen then 
lock puck in place by tightening M5 x 25 mm screw (B) on 
the underside of tilt bracket using 4 mm allen wrench (I).
Tig

hten all (M5 x 20 mm, M5 x 25 mm) screws. 

NOTE: To remove screen from arm, remove two 
M5 x 20 mm screws (J) and brake pad. Lift screen out of 
tilt bracket. 

•  Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely 

handle placement of the screen.

•  Failure to l

ock brake pad with two M5 x 20 mm screws (J) and lock tilt bracket with M5 x 25 mm screw (B) can 

cause screen t

o come off mount if hit accidentally.

ADAPTER PLATE

BRAKE PAD

TILT 
BRACKET

ARM

PUCK

•  Do not tighten screws with excessive force. Overtightening 

can cause damage to mount. Tighten M5 x 20 mm screws (J)
to 20 in. • lb (2.26 N.M.) maximum torque.

© 2012, Peerless Industries, Inc. All rights reserved. 

All other brand and product names are trademarks or registered trademarks of their respective owners.