Peerless Industries DS-VW760 사용자 설명서

ISSUED: 04-23-10   SHEET #: 145-9010-2  04-27-10

Secure display carriage by pulling release pin, fastening clevis pin, clip, four screws, and spacer as shown. 

NOTE: make sure that spacer is in-between display carriage and video wall mount assembly.  

VIDEO WALL  

MOUNT ASSEMBLY

DISPLAY CARRIAGE

CLIP

RELEASE PIN

SCREWS

HOLE IN PIN

SPACER

CLEVIS PIN

Attach adapter brackets (

B) to back of display using four M6 x 12 mm phillips screws (I) with nylon shoulder washer (H), or four

M8 x 15 mm phillips screws (

J) as shown below.

NOTE: Hardware to attach dedicated plates to the mount are included with the dedicated plates.  

400 mm  300 mm  200 mm 

PLP 

 MAX VESA-600 mm 

MIN VESA-200 mm 

  

DISPLAY