Peerless Industries IM740P-S 사용자 설명서

ISSUED: 12-04-07  SHEET #: 095-9280-3   03-25-10

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

For optional installation of electrical gang box, access plates located on the bottom or top of in-wall box can be 

temporarily removed to install electrical gang box as shown in figure 4.1.

Insert up to four cable management clips (

F) into the desired positions in the in-wall box as shown in figure 4.2

for routing cables. Refer to instruction included with PA740 articulating arm 

(

AA)

 for cable management with arm.

Insert cable bushing (

E) into top or bottom hole of in-wall box for routing cables through in-wall box. Plastic 

finishing caps (

G) can be used in holes where cables are not being routed.

NOTE: Make sure cables have enough slack to allow full movement of the arm.
Use cable ties (

H) to secure cables to cable management clips as shown in figure 4.3.

CABLES

ACCESS 

PLATE

SCrEEN NOT ShOWN fOr CLArITy

SCrEEN NOT ShOWN fOr CLArITy

© 2007, Peerless Industries, Inc. All rights reserved. 

All other brand and product names are trademarks or registered trademarks of their respective owners.