Parker Hannifin 88-020292-01 A 사용자 설명서

E-AC Drive Hardware Installation Guide

Chapter 2 – Installation

Inspect your shipment carefully. You should have received one or more of
the following:

E-AC Drive

E-AC

E-AC Drive Quick Reference Guide

88-020290-01

You may have ordered a motor from one of the following families of
Compumotor motors:

OS Motors

VS Motors

To prevent injuries to personnel and damage to equipment, observe the
following guidelines:

•

Never probe the drive. Hazardous voltages are present within the drive.

•

Never open the drive. Opening the drive will void the warranty.

•

Never increase the current setting to a value greater than that specified for
the motor you are using. Excessive current may cause motor overheating
and failure.

•

Always remove AC power before changing or reconfiguring DIP switches.

Topics in this chapter are arranged to lead you through the installation
process in a step–by–step manner. Complete each step before proceeding
to the next.

The order of topics in the installation procedure is:

•

Quick Test

•

Motor selection:  specifications, speed/torque curves and dimensions

•

Motor wiring—series vs. parallel

•

DIP switch configuration

•

Controller connections and 25 pin D-connector input/output schematic

•

Drive mounting

•

Motor mounting

•

Connecting the load

•

Connecting AC power

•

Testing the installation