Winegard DS-1000 전단
WINEGARD
®
Winegard Company
3000 Kirkwood St., Burlington, IA 52601-2000
Printed in U.S.A. ©Winegard Company 1996 2451719
MODEL DS-1000
Universal Home Mount
WARNING:
INSTALLATION OF THIS MOUNT NEAR POWER LINES
IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE
INSTALLATION INSTRUCTIONS.
IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE
INSTALLATION INSTRUCTIONS.
STEP 1. Assemble DS-1000 mount as shown in Fig-
ure below. Make sure to attach the long arm of the
pipe to the base.
ure below. Make sure to attach the long arm of the
pipe to the base.
STEP 2. Mount satellite antenna and DS-1000 to wall
or other surface per your satellite installation manual.
The DS-1000 is used between the satellite monut and
the surface the mount attaches to.
or other surface per your satellite installation manual.
The DS-1000 is used between the satellite monut and
the surface the mount attaches to.
NOTE: A variety of installation angles may be
obtained by changing the base from the left to the
right side.
obtained by changing the base from the left to the
right side.
STEP 3. Loosen mast clamps and rotate pipe so the
top is plumb (straight up and down).
top is plumb (straight up and down).
STEP 4. Tighten mast clamps and mount off-air an-
tenna on it.
tenna on it.
Make sure to ground both antenna/
mounts per satellite and off-air antenna installa-
tion instructions.
tion instructions.