Dynex DX-TVMLPTB03 사용자 설명서

Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from 
damages and scratches.

If your TV has a table-top stand attached, remove the stand. See the documentation that came with your 
TV for instructions.

Temporarily lay the TV brackets (B and C) on the back of your TV.

Align the screw holes in the TV brackets with the mounting screw holes on your TV. 

Identify which type of back your TV may have:

• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need 

spacers when assembling the wall mount.

• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need 

spacers when assembling the wall mount.

• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You 

will need spacers when assembling the wall mount.

Remove the TV brackets.

DX-TVMLPTB03_14-0885_MAN_V1_ENG.fm  Page 5  Thursday, August 21, 2014  8:10 AM